now that i've been doing loops with my blade cp (2 crashes out of 5 loops), i want to get a 7c, my hobby shop will gimme a deal that comes with micro servos and micro reciever. i'm doing this also to help ease the start up cost when i get a trex.

now here's my question, i know it had probably been answered, i want to know how to make a 7c tx work with my eflight reciever? i'm not talkign about programmings (even though it would be greatly appreciated), but rather the stuff like, the kinds of crystals, frequency, and other important info on how to make it work with the receiver in my 4 in 1, i need help fast.

thx

I got a 7c that is the same chan as my radio on my cp pro. I did not have to change anything, just had to program the transmiter and I was ready to fly. Programing the transmiter takes a while....it took me one whole battery charge just to get the trasnmiter programed the way I like it. I will help you with any specific programing questions you have, but don't have the time right now to go through all the settings.

so you mean that just plug in the 7c xtal into the 4 in 1 and it'll work right? as long as it's the same channel as the original xtal on the bcp?
thx

I did not touch the reciver (the pro has a sepearte reciver)...as long as you get a transmiter that is the same chan as your reciver you should not have to do anything to the heli, or the recivers crystal. All you need to do is buy a ch 17 (or what ever chan your heli is) transmiter, turn it on, program the transmiter, and fly the heli. As long as you get the same chan as you currently have/using you don't need to do anything else, no swaping crystals etc.

ok, then it's easier than i thought