Upcoming Blade 400?!
10-11-2007, 01:37 PM
#101
Senior Member
Join Date: Aug 2007
Location: Grand Rapids, MI
Posts: 1,578
Likes: 0
Received 0 Likes
on
0 Posts
RE: Upcoming Blade 400?!
ORIGINAL: FlyinLo
Judging by the current DX6 and DX7 pricing, my guestimate would be that the DX6i would sell for $230-$260 including the receiver and 3 servos.
Figuring the receiver and 3 digital S75 servos will probably be at least $100 I'd guess the radio alone could sell for $150-$180
But I could be way off
Judging by the current DX6 and DX7 pricing, my guestimate would be that the DX6i would sell for $230-$260 including the receiver and 3 servos.
Figuring the receiver and 3 digital S75 servos will probably be at least $100 I'd guess the radio alone could sell for $150-$180
But I could be way off
Anyone who wants the Blade 400 should buy one. However, if you would just like to have a Tx that can handle more than one bird AND have 5 point pitch and throttle curves, then the DX6i might be a good fit for someone at that price.
10-14-2007, 01:23 PM
#102
Junior Member
Join Date: Oct 2007
Location: Sherwood,
OR
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
RE: Upcoming Blade 400?!
The owner of my LHS recieved something from e-flight that said the blade 400 will be released very soon, but who knows what very soon means to e-flight.
10-14-2007, 07:24 PM
#103
Senior Member
Join Date: Aug 2006
Location: D, NH
Posts: 216
Likes: 0
Received 0 Likes
on
0 Posts
RE: Upcoming Blade 400?!
anxiously awaiting for my preordered B400!
Enjoying the hell out of my blade CP in the meantime though. I flew without training gear for the first time tonight
Enjoying the hell out of my blade CP in the meantime though. I flew without training gear for the first time tonight
10-15-2007, 01:19 PM
#104
Member
Join Date: Feb 2006
Location: sudburyOntario, CANADA
Posts: 61
Likes: 0
Received 0 Likes
on
0 Posts
RE: Upcoming Blade 400?!
Well I've read all the posts on this forum and others. I'm a noob and when I got into this hobby the most important part for me was parts support. I didn't use a Sim nor a cx nor an FP heli. I went right to a CP heli..The axe cp by helimax and dam me for saying it was the best starter heli by far. I've had more success with this thing that if I had a bought anything else for that matter. Sure I crashed 4 times cost me time and money to repair it. But its still running I could'nt be happier. Incidently I don't crash anymore. I can hover with ease and don't find it that difficult. But I digress....I'm gonna buy the eflite 400 because I think it's my next best up grade from where I am right now. I like my axe cp but the tail motor thing is starting to become bother some. I like the fact that the blade 400 is belt driven (1 esc and 1 motor) as aposed to going seperates with my axe cp. (2 motors 2 escs). I'm presently gonna change the tail to gws dd and ad lipos then I'm done with this heli. The fact of the matter is eflite has good parts support and greathobbies in Canada here is gonna have the blade 400 in thier line up and has eflite as a product they sell with parts support. From a begginner stand point I beleive in the blade 400 and i think it will be viable next option for any noob and me for that matter. I like it. I want and will have it. The electronics alone would cost more to buy seperatly. The price point is excellent. Just my thoughts.
10-18-2007, 12:59 PM
#105
Senior Member
Join Date: Aug 2006
Location: D, NH
Posts: 216
Likes: 0
Received 0 Likes
on
0 Posts
RE: Upcoming Blade 400?!
ORIGINAL: FlyinLo
Judging by the current DX6 and DX7 pricing, my guestimate would be that the DX6i would sell for $230-$260 including the receiver and 3 servos.
Figuring the receiver and 3 digital S75 servos will probably be at least $100 I'd guess the radio alone could sell for $150-$180
But I could be way off
Judging by the current DX6 and DX7 pricing, my guestimate would be that the DX6i would sell for $230-$260 including the receiver and 3 servos.
Figuring the receiver and 3 digital S75 servos will probably be at least $100 I'd guess the radio alone could sell for $150-$180
But I could be way off
http://www.horizonhobby.com/Products...ProdID=SPM6600
10-18-2007, 03:42 PM
#107
Senior Member
Join Date: Aug 2006
Location: Louisville,
KY
Posts: 284
Likes: 0
Received 0 Likes
on
0 Posts
RE: Upcoming Blade 400?!
DX6i alone!! This just makes my day. I haven't flown my BCP since I sold off the DX7[
] It turned a squirrely beast into a decent flyer. However I didn't want to spend $300+ again for just this app. The old DX6 wouldn't have worked because it didn't have sub-trim (unless I'm mistaken about that) and getting a proper setup is key to a good flying BCP. Plus, I like that 5 point throttle curve.
Man, I can't wait for this to come out!
] It turned a squirrely beast into a decent flyer. However I didn't want to spend $300+ again for just this app. The old DX6 wouldn't have worked because it didn't have sub-trim (unless I'm mistaken about that) and getting a proper setup is key to a good flying BCP. Plus, I like that 5 point throttle curve.Man, I can't wait for this to come out!
10-20-2007, 04:33 PM
#108
Member
Join Date: Jun 2007
Location: Beaverton,
OR
Posts: 87
Likes: 0
Received 0 Likes
on
0 Posts
RE: Upcoming Blade 400?!
Spektrum finally has the DX6I on their web site: http://www.spektrumrc.com/Products/D...ProdID=SPM6600
DX6I 6Channel Full Range w/o Servos MD2
Overview
The 6-channel DX6i uses the same full-range DSM2â„¢ technology found in the Spektrum DX7 and includes an impressive list of programming features for both airplanes and helicopters that are simple to access and use. It comes with the new AR6200 DSM2 6-channel receiver that is robust enough to use in large models yet compact enough fit in many park flyers. The DX6i is also compatible with all existing Spektrum aircraft receivers. Whatever kind of flying you do, the DX6i can be adapted to most any model in your existing collection that requires 6-channels or less.
Key Features
Full range 2.4GHz DSM2 6-channel radio
10-model memory
ModelMatch
ServoSync
Roller/selector user interface
Attractive and ergonomic design
Proven DSM2 technology
Rudder dual-rate
Large LCD display
Integrated timer
Contrast Adjustment
Dual-speed trim scroll
Model name and type
Throttle cut
Trainer Mode
Model Copy
Travel adjustment
Sub-trim
Servo monitor
Dual rate and exponential
Compatible with any existing DSM and DSM2 receivers
Airplane Programing Features: Flaps, P-mixes, Dual aileron, V-tail, Delta, Differential
Heli Programming Features: Gyro adjust, Graphic throttle curve, Graphic pitch curve, P-mixes, Revo mix, Swash type (Normal, and CCPM 120)
Adjustable stick length
Direct trim access display
DX6I 6Channel Full Range w/o Servos MD2
Overview
The 6-channel DX6i uses the same full-range DSM2â„¢ technology found in the Spektrum DX7 and includes an impressive list of programming features for both airplanes and helicopters that are simple to access and use. It comes with the new AR6200 DSM2 6-channel receiver that is robust enough to use in large models yet compact enough fit in many park flyers. The DX6i is also compatible with all existing Spektrum aircraft receivers. Whatever kind of flying you do, the DX6i can be adapted to most any model in your existing collection that requires 6-channels or less.
Key Features
Full range 2.4GHz DSM2 6-channel radio
10-model memory
ModelMatch
ServoSync
Roller/selector user interface
Attractive and ergonomic design
Proven DSM2 technology
Rudder dual-rate
Large LCD display
Integrated timer
Contrast Adjustment
Dual-speed trim scroll
Model name and type
Throttle cut
Trainer Mode
Model Copy
Travel adjustment
Sub-trim
Servo monitor
Dual rate and exponential
Compatible with any existing DSM and DSM2 receivers
Airplane Programing Features: Flaps, P-mixes, Dual aileron, V-tail, Delta, Differential
Heli Programming Features: Gyro adjust, Graphic throttle curve, Graphic pitch curve, P-mixes, Revo mix, Swash type (Normal, and CCPM 120)
Adjustable stick length
Direct trim access display
10-20-2007, 07:08 PM
#109
Member
Join Date: Nov 2004
Location: Burr Ridge,
IL
Posts: 78
Likes: 0
Received 0 Likes
on
0 Posts
RE: Upcoming Blade 400?!
FWIW
I just got back from the iHobby show and saw the 400 in person. It is BEAUTIFUL!
They had the stock one and a full carbon fiber one. It is really a nice piece of engineering.
I have a pic on my cell phone if anyone is interested.
They are hoping to have it available by Thanksgiving but Christmas might be the arrival date.
They also said all of the parts will be available at the same time.
Interesting is that 5000 to 6000 are in the US right now but they are waiting for more to come from overseas.
The hold-up in development was the DX6i and not the bird.
The DX6i is a completely new radio, not a re-branded existing model.
Anyways, I am glad that my pre-order is in.
I just got back from the iHobby show and saw the 400 in person. It is BEAUTIFUL!
They had the stock one and a full carbon fiber one. It is really a nice piece of engineering.
I have a pic on my cell phone if anyone is interested.
They are hoping to have it available by Thanksgiving but Christmas might be the arrival date.
They also said all of the parts will be available at the same time.
Interesting is that 5000 to 6000 are in the US right now but they are waiting for more to come from overseas.
The hold-up in development was the DX6i and not the bird.
The DX6i is a completely new radio, not a re-branded existing model.
Anyways, I am glad that my pre-order is in.
10-20-2007, 07:40 PM
#110
Senior Member
Join Date: Jun 2007
Location: Avon,
CO
Posts: 1,075
Likes: 0
Received 0 Likes
on
0 Posts
RE: Upcoming Blade 400?!
Thanks for the update.
I'm sure you all know this already, but the [link=http://www.e-fliterc.com/Products/Default.aspx?ProdID=EFLH1400]E-FLITE WEBSITE[/link] has a cool video of the Blade 400.
I can't believe I'm posting on this thread. It seems like just a few months ago I was saying I'd never be interested in a 400 size outdoor flyer.
Oh well, 100% addicted and not interested in rehab.
I'm sure you all know this already, but the [link=http://www.e-fliterc.com/Products/Default.aspx?ProdID=EFLH1400]E-FLITE WEBSITE[/link] has a cool video of the Blade 400.
I can't believe I'm posting on this thread. It seems like just a few months ago I was saying I'd never be interested in a 400 size outdoor flyer.
Oh well, 100% addicted and not interested in rehab.
10-20-2007, 07:49 PM
#111
Senior Member
Join Date: Aug 2006
Location: D, NH
Posts: 216
Likes: 0
Received 0 Likes
on
0 Posts
RE: Upcoming Blade 400?!
mpetrich, please post any pics you have!
Even though the stock version is all plastic, did it look like the parts were decent quality?
They're going to ship with the yellow tribal theme, right?
Did they give any indication about pricing for the aluminum parts?
Even though the stock version is all plastic, did it look like the parts were decent quality?
They're going to ship with the yellow tribal theme, right?
Did they give any indication about pricing for the aluminum parts?
10-20-2007, 08:29 PM
#112
Member
Join Date: Nov 2004
Location: Burr Ridge,
IL
Posts: 78
Likes: 0
Received 0 Likes
on
0 Posts
RE: Upcoming Blade 400?!
OK, let me figure out how to Bluetooth the photo from my phone to my PC!!
Yes, the stock out-of-the-box version is yellow.
No pricing was mentioned on the aluminum and carbon fiber parts.
The carbon fiber stuff looked great.
Re. the quality, I have only been flying helicopters for about a year and a half and have the CP Pro and CX2.
What got my pretty excited is that the Blade 400, in my opinion, is in a different league in terms of overall strength and build.
Don't get me wrong, I love the CP and the CX but this is an entirely different helicopter.
It looks very well built and sturdy. The internal layout is nice and clean and there were a lot of people checking it out.
Funny, the hot thing at IHobby was DEFINITELY helicopters.
Alot of Chinese importers selling all types of helicopters.
I picked up one for $60 and it actually flies!
Hope that helps.
Matt
Yes, the stock out-of-the-box version is yellow.
No pricing was mentioned on the aluminum and carbon fiber parts.
The carbon fiber stuff looked great.
Re. the quality, I have only been flying helicopters for about a year and a half and have the CP Pro and CX2.
What got my pretty excited is that the Blade 400, in my opinion, is in a different league in terms of overall strength and build.
Don't get me wrong, I love the CP and the CX but this is an entirely different helicopter.
It looks very well built and sturdy. The internal layout is nice and clean and there were a lot of people checking it out.
Funny, the hot thing at IHobby was DEFINITELY helicopters.
Alot of Chinese importers selling all types of helicopters.
I picked up one for $60 and it actually flies!
Hope that helps.
Matt
10-20-2007, 08:44 PM
#113
Join Date: Sep 2007
Location: SEQUIM,
WA
Posts: 6,100
Likes: 0
Received 0 Likes
on
0 Posts
RE: Upcoming Blade 400?!
I can't believe I'm posting on this thread. It seems like just a few months ago I was saying I'd never be interested in a 400 size outdoor flyer.
Oh well, 100% addicted and not interested in rehab.
Oh well, 100% addicted and not interested in rehab.
FlyinLo: Beautiful avatar pic of your plane on the water...! Maybe in the near future we'll see floats on yer new 400 out there to....
10-20-2007, 09:00 PM
#114
Senior Member
Join Date: Aug 2006
Location: D, NH
Posts: 216
Likes: 0
Received 0 Likes
on
0 Posts
RE: Upcoming Blade 400?!
Thanks, J-Michael
I've had these in mind, not sure if they'd be too big. (3rd item down)
http://www.helihobby.com/html/extras.html#PARTHMXE2000
I've had these in mind, not sure if they'd be too big. (3rd item down)
http://www.helihobby.com/html/extras.html#PARTHMXE2000
10-23-2007, 08:41 AM
#116
Member
Join Date: Jun 2007
Location: Beaverton,
OR
Posts: 87
Likes: 0
Received 0 Likes
on
0 Posts
RE: Upcoming Blade 400?!
Found some new pics from the Chicago Hobby show on another forum (scroll down halfway): http://www.runryder.com/helicopter/t381973p1
10-27-2007, 02:56 PM
#121
Senior Member
My Feedback: (1)
Join Date: Mar 2004
Location: Belo Horizonte, BRAZIL
Posts: 222
Likes: 0
Received 0 Likes
on
0 Posts
RE: Upcoming Blade 400?!
Hi Guys, I work at the Brazillian Distribuitor and I went to iHobby 2007 for the first time. It was great and I meet very nice people there.
A filmed Jason flying the Blade 400, if you wanna see it:
http://www.dinizesteves.com.br/index...o=2&codigo=114
A filmed Jason flying the Blade 400, if you wanna see it:
http://www.dinizesteves.com.br/index...o=2&codigo=114
10-28-2007, 05:30 PM
#125
Join Date: Dec 2003
Location: El Paso,
TX
Posts: 5,277
Likes: 0
Received 0 Likes
on
0 Posts
RE: Upcoming Blade 400?!
Since nobody ( that ordered one) has had there hands on one yet there's no telling. There are stories out there of people who have seen it but not flown it ( but swear its the best thing since sliced bread). Tons of slick advertising and people are lining up to pre order. Only time will tell on this one. I'm still not convinced. I'll stick with my TRex till the LHS gets them in and I can actually fly it. I'm not trying to be a Smart ***** but The Pro was supposed to be "3Dready...right out of the box" too so Im a bit gun shy.