How Do I set the Blade Tracking on The CX
 

On mu Blade CX the Lower Plades are not spinning in the same plane

How do I adjust them?

Thank you

Harry

RE: How Do I set the Blade Tracking on The CX
 

If the lower blades do not spin on the same plane, there could be a couple of reasons.

1. Blades, if you replace them replace them in pairs and notice the VERY little number in the circle. Make sure they match.
2. Could be the swash plate is coming apart, press it back together.

If you have a vibration it could cause this also.

Let us know what you find.

RE: How Do I set the Blade Tracking on The CX
 

Or the pins on the lower head are bent.

RE: How Do I set the Blade Tracking on The CX
 

Thank you