How Do I set the Blade Tracking on The CX
09-16-2006 | 09:37 PM
#2
Member
Joined: Jan 2003
Posts: 61
Likes: 0
Received 0 Likes
on
0 Posts
From: Winston,
GA
RE: How Do I set the Blade Tracking on The CX
If the lower blades do not spin on the same plane, there could be a couple of reasons.
1. Blades, if you replace them replace them in pairs and notice the VERY little number in the circle. Make sure they match.
2. Could be the swash plate is coming apart, press it back together.
If you have a vibration it could cause this also.
Let us know what you find.
1. Blades, if you replace them replace them in pairs and notice the VERY little number in the circle. Make sure they match.
2. Could be the swash plate is coming apart, press it back together.
If you have a vibration it could cause this also.
Let us know what you find.
