Blades don't spin
 

Hey, I had to install a new inner shaft because the top of my original one broke. However, once I tried to start it up to test it out, the blades don't spin. When I press the right stick to the right or left, it adjusts the blades as if it's steering. However, when I use the left stick, nothing happens at all. Any ideas?

RE: Blades don't spin
 

(cx2 ?) turn off your tx then turn it back on with the battery on the heli connected. let it arm. the blades should then spin.

RE: Blades don't spin
 

It's a CX2. I've tried doing that, but it didn't work. Other ideas?

RE: Blades don't spin
 

Is the light on the 4-in-1 solid green?

RE: Blades don't spin
 

On the end of the inner shaft there are two flat spots,Make sure that the flat spots are lining up with the screws on the bottom collar.