RCU Forums - Will this work?

RCU Forums (https://www.rcuniverse.com/forum/)

- E-Flite Helicopters (https://www.rcuniverse.com/forum/e-flite-helicopters-447/)

- - Will this work? (https://www.rcuniverse.com/forum/e-flite-helicopters-447/8595558-will-work.html)

Will this work for the tail on Blade 400?
Spektrum DSP75 Prog. Digital Sub-Micro Servo

Specs
Size Category: Minis and Micros
Type: Digital
Torque: 19.0 oz/in @ 4.8v
Speed: .11 sec/60° @ 4.8v
Dimensions (WxLxH): .90 x .45 x .94 in (23 x 12 x 24mm)
Weight: .26 oz (7.5 g)
Bushing Or Bearing: Bushing
Motor Type: Coreless
Connector Type: Universal
Gear Type: Nylon

http://www.spektrumrc.com/Products/D...rodID=SPMDSP75

I replaced all the others with Hitec 65's and used all the stocks for the tail, on my last stock servo.

RE: Will this work?

thats pretty much whats on it now, one say`s spektrum and the other says e-flite. but its the same servo
dont waste your money.
you need something in the range like .05 to .09 sec @4.8v
look at the jr. ds290g, futaba 9257 9650.

gws as one people are useing too