RCU Forums - changing from 4 in 1 to 3 in 1

RCU Forums (https://www.rcuniverse.com/forum/)

- E-Flite Helicopters (https://www.rcuniverse.com/forum/e-flite-helicopters-447/)

- - changing from 4 in 1 to 3 in 1 (https://www.rcuniverse.com/forum/e-flite-helicopters-447/9238010-changing-4-1-3-1-a.html)

changing from 4 in 1 to 3 in 1

My grandson has a CX and he was changing from a 4 in 1 to a 3 in 1. He is 9 years old and forgot to check the plug positions before he removed the 4 in 1.

Need your help - what are the positions for the right/left motor plugs and which channel is the gyro pluged into on a berg 7 channel receiver. Looks like there maybe a separate plug for adjusting gain on the transmitter (yellow wire(

Any help would be appreciated.

RE: changing from 4 in 1 to 3 in 1

Quote:

ORIGINAL: mtnflyer44

My grandson has a CX and he was changing from a 4 in 1 to a 3 in 1. He is 9 years old and forgot to check the plug positions before he removed the 4 in 1.

Need your help - what are the positions for the right/left motor plugs and which channel is the gyro pluged into on a berg 7 channel receiver. Looks like there maybe a separate plug for adjusting gain on the transmitter (yellow wire(

Any help would be appreciated.

mtnflyer44

Here is a copy of the manual if you dont have it which showes the 4-1 and 3-1
http://www.horizonhobby.com/ProdInfo...CX2_Manual.pdf

JPEE

RE: changing from 4 in 1 to 3 in 1