changing from 4 in 1 to 3 in 1
11-08-2009 | 02:00 PM
#1
Thread Starter
Junior Member
Joined: Jan 2008
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
From: Gunnison, CO
changing from 4 in 1 to 3 in 1
My grandson has a CX and he was changing from a 4 in 1 to a 3 in 1. He is 9 years old and forgot to check the plug positions before he removed the 4 in 1.
Need your help - what are the positions for the right/left motor plugs and which channel is the gyro pluged into on a berg 7 channel receiver. Looks like there maybe a separate plug for adjusting gain on the transmitter (yellow wire(
Any help would be appreciated.
Need your help - what are the positions for the right/left motor plugs and which channel is the gyro pluged into on a berg 7 channel receiver. Looks like there maybe a separate plug for adjusting gain on the transmitter (yellow wire(
Any help would be appreciated.
11-08-2009 | 05:49 PM
#2
RE: changing from 4 in 1 to 3 in 1
ORIGINAL: mtnflyer44
My grandson has a CX and he was changing from a 4 in 1 to a 3 in 1. He is 9 years old and forgot to check the plug positions before he removed the 4 in 1.
Need your help - what are the positions for the right/left motor plugs and which channel is the gyro pluged into on a berg 7 channel receiver. Looks like there maybe a separate plug for adjusting gain on the transmitter (yellow wire(
Any help would be appreciated.
My grandson has a CX and he was changing from a 4 in 1 to a 3 in 1. He is 9 years old and forgot to check the plug positions before he removed the 4 in 1.
Need your help - what are the positions for the right/left motor plugs and which channel is the gyro pluged into on a berg 7 channel receiver. Looks like there maybe a separate plug for adjusting gain on the transmitter (yellow wire(
Any help would be appreciated.
Here is a copy of the manual if you dont have it which showes the 4-1 and 3-1
http://www.horizonhobby.com/ProdInfo...CX2_Manual.pdf
JPEE
