Who wants a Pulse XT 25E?
#1
Thread Starter
Join Date: Jan 2006
Location: Largo,
FL
Posts: 693
Likes: 0
Received 0 Likes
on
0 Posts
Who wants a Pulse XT 25E?
Since the Mini Pulse owners club is well into it's 11th page and Pulses are popping up at club fields and parks all over the country, doesn't it seem a 25-32 version would make a good companion to the Ultra Stick 25E?
The Pulse is very simply a terific airplane. We know E Flite and Hangar 9 representatives cruise this forum, so let's make a little noise and see if we can get them thinking about this plane.
Yo, Hangar 9 and E Flite....if you build this plane you can take my order right now for two of them.
The Pulse is very simply a terific airplane. We know E Flite and Hangar 9 representatives cruise this forum, so let's make a little noise and see if we can get them thinking about this plane.
Yo, Hangar 9 and E Flite....if you build this plane you can take my order right now for two of them.
#3
Thread Starter
Join Date: Jan 2006
Location: Largo,
FL
Posts: 693
Likes: 0
Received 0 Likes
on
0 Posts
RE: Who wants a Pulse XT 25E?
ORIGINAL: fliprob17
So somewhere between the Mini Pulse and the Pulse 40 as far as wingspan? Like a 50"?
So somewhere between the Mini Pulse and the Pulse 40 as far as wingspan? Like a 50"?
#4
Senior Member
Join Date: Sep 2004
Location: B, AUSTRALIA
Posts: 1,867
Likes: 0
Received 0 Likes
on
0 Posts
RE: Who wants a Pulse XT 25E?
Been following the mini pulse thread for a few weeks now. It sounds like a really nice flying plane and a good addition to any hangar.
I was thinking of buying one just for a cruiser - fun flying, but couldn't resist the 480 motor at my LHS. Now I just need the plane! At the moment there are a lot of planes around the 1m wingspan so its only kinda tempting, especailly as I have 3 planes waiting on my bench right now PLUS a new stryker 'c' with only 1 flight on it, a kit EDF nanojet (1 flight) and a extra300 (ready for maiden) waiting ready to go as well. Surely a 50" would just push me over that pychological barrier and I'd have to have one.
Count me in for 1 for sure
clovus
I was thinking of buying one just for a cruiser - fun flying, but couldn't resist the 480 motor at my LHS. Now I just need the plane! At the moment there are a lot of planes around the 1m wingspan so its only kinda tempting, especailly as I have 3 planes waiting on my bench right now PLUS a new stryker 'c' with only 1 flight on it, a kit EDF nanojet (1 flight) and a extra300 (ready for maiden) waiting ready to go as well. Surely a 50" would just push me over that pychological barrier and I'd have to have one.
Count me in for 1 for sure
clovus
#5
Senior Member
Join Date: May 2006
Location: Rancho Santa Margarita, CA
Posts: 1,590
Likes: 0
Received 0 Likes
on
0 Posts
RE: Who wants a Pulse XT 25E?
I was tempted to go after the Pulse XT 40 and turn it electric. But it was just a little too big and heavy. Something in the middleground would be very hard to pass up. I am definitely in for 1 .....which really means 2
#7
Senior Member
Join Date: May 2006
Location: Rancho Santa Margarita, CA
Posts: 1,590
Likes: 0
Received 0 Likes
on
0 Posts
RE: Who wants a Pulse XT 25E?
Smaller than 50" would put it too close to the Mini Pulse XT to make it worth it for the manufaturer and the potential buyer. That is why you go with the Power 32BL
#8
Thread Starter
Join Date: Jan 2006
Location: Largo,
FL
Posts: 693
Likes: 0
Received 0 Likes
on
0 Posts
RE: Who wants a Pulse XT 25E?
ORIGINAL: P-51B
I would think smaller than 50" span to perform on their 25BL motor. The ultrastick 25E on the 25 motor is not impressive.
I would think smaller than 50" span to perform on their 25BL motor. The ultrastick 25E on the 25 motor is not impressive.
#10
Thread Starter
Join Date: Jan 2006
Location: Largo,
FL
Posts: 693
Likes: 0
Received 0 Likes
on
0 Posts
RE: Who wants a Pulse XT 25E?
ORIGINAL: P-51B
Yep, it is different on the 32, but then I have to buy new batteries (4s). [sm=cry_smile.gif]
Yep, it is different on the 32, but then I have to buy new batteries (4s). [sm=cry_smile.gif]
The 25E is very nice with the 3 cell pack, but if you want something that's awesome I'de say 4 cells is the way to go. But, since you already have the 3 celllk packs, they will work acceptably.
#11
Senior Member
Join Date: Jul 2005
Location: LondonSussex, UNITED KINGDOM
Posts: 500
Likes: 0
Received 0 Likes
on
0 Posts
RE: Who wants a Pulse XT 25E?
Maybe this http://www.horizonhobby.com/Products...ProdId=EFL4050 is what you're after ?
#12
Senior Member
My Feedback: (5)
Join Date: Oct 2002
Location: An Iceburg in, ANTARCTICA
Posts: 6,747
Likes: 0
Received 0 Likes
on
0 Posts
RE: Who wants a Pulse XT 25E?
ORIGINAL: netdudeuk
Maybe this http://www.horizonhobby.com/Products...ProdId=EFL4050 is what you're after ?
Maybe this http://www.horizonhobby.com/Products...ProdId=EFL4050 is what you're after ?
Saw that yesterday. The weight is listed as heavier than the Ultrastick 25E.
Frankly I would like an extra 260 or sukhoi for the 25E. Hyperion has some planes that are close, and may work.
#13
Senior Member
Join Date: May 2006
Location: Rancho Santa Margarita, CA
Posts: 1,590
Likes: 0
Received 0 Likes
on
0 Posts
RE: Who wants a Pulse XT 25E?
ORIGINAL: netdudeuk
Maybe this http://www.horizonhobby.com/Products...ProdId=EFL4050 is what you're after ?
Maybe this http://www.horizonhobby.com/Products...ProdId=EFL4050 is what you're after ?
Did they start production on the Pulse XT 25E yet .......at least start on the plans right
#14
Thread Starter
Join Date: Jan 2006
Location: Largo,
FL
Posts: 693
Likes: 0
Received 0 Likes
on
0 Posts
RE: Who wants a Pulse XT 25E?
ORIGINAL: fliprob17
Just does not have the striking appeal and looks of the Pulse.....
Just does not have the striking appeal and looks of the Pulse.....
Did they start production on the Pulse XT 25E yet?
.......at least start on the plans right ....
#15
Senior Member
Join Date: Sep 2005
Location: Mesa,
AZ
Posts: 3,127
Likes: 0
Received 0 Likes
on
0 Posts
RE: Who wants a Pulse XT 25E?
ORIGINAL: Doc Austin
I think we are sadly going to have to wait.......at the earliest. E Flite has it's plate full with the Diamante and P38 (gotta have one of those too).
I think we are sadly going to have to wait.......at the earliest. E Flite has it's plate full with the Diamante and P38 (gotta have one of those too).
EDIT: why does it show that i have attachments?
#16
Thread Starter
Join Date: Jan 2006
Location: Largo,
FL
Posts: 693
Likes: 0
Received 0 Likes
on
0 Posts
#19
RE: Who wants a Pulse XT 25E?
I am putting a Pulse XT .40 together. Axi 4120/14, 13x10 APCe , Jeti Spin 55. Evo 20 4s 4400 pack. It is a little heavy, but looks great!
Ken
Ken
#20
Thread Starter
Join Date: Jan 2006
Location: Largo,
FL
Posts: 693
Likes: 0
Received 0 Likes
on
0 Posts
RE: Who wants a Pulse XT 25E?
Please let me know what kind of run time you get. I'm probably going to get the 6000mah pack, but if I don't need it to get 12-15 minutes I would rather save the weight and money.
#21
Senior Member
My Feedback: (5)
Join Date: Oct 2002
Location: An Iceburg in, ANTARCTICA
Posts: 6,747
Likes: 0
Received 0 Likes
on
0 Posts
RE: Who wants a Pulse XT 25E?
ORIGINAL: Doc Austin
Since the Mini Pulse owners club is well into it's 11th page and Pulses are popping up at club fields and parks all over the country, doesn't it seem a 25-32 version would make a good companion to the Ultra Stick 25E?
The Pulse is very simply a terific airplane. We know E Flite and Hangar 9 representatives cruise this forum, so let's make a little noise and see if we can get them thinking about this plane.
Yo, Hangar 9 and E Flite....if you build this plane you can take my order right now for two of them.
Since the Mini Pulse owners club is well into it's 11th page and Pulses are popping up at club fields and parks all over the country, doesn't it seem a 25-32 version would make a good companion to the Ultra Stick 25E?
The Pulse is very simply a terific airplane. We know E Flite and Hangar 9 representatives cruise this forum, so let's make a little noise and see if we can get them thinking about this plane.
Yo, Hangar 9 and E Flite....if you build this plane you can take my order right now for two of them.
Please this thread Doc: http://www.rcuniverse.com/forum/m_76...tm.htm#7636966