As I sit here charging my RX and TX batteries on my ucd w/ saito 82, I started wonderind how many TP 1320's it would take to power a .40 3d bird. I have 3 lipos for a foamy I just got. And If I set up a P board, I could buy a couple more and use them interchangeably(SP).

Thanks,

Rob

I would use a AXI or Hacker motor...

It would take a LOT of TP1320s... You'd want about 5S or 6S, then you'd need about 50 Amps worth in parallel (TP1320 @ 10C = 13.2 Amps), which would be about 4P.