What is the best Receiver, Servos, ESC and NiCad battery package for IFO Mini? I have GWS PICO Flight Pack with 6 cell 150MAmp battery, would it work? If not then what is the alternative?

Any additional info from the experienced IFO Mini flyer, for improving performance, and building Mini from the kit,will be welcome.

Thanks

Rani34: I just finished my mini this last weekend and flew it indoors. I used the GWS 2 amp speed control, 4RP receiver, and pico BB servos. (Standard picos would work just fine). I'm using the GWS S2 drive with a 9/4.7 prop but the "A" drive with a 10/4.7 prop might be better yet. For batteries I have a 7 cell 270ma Ni-MH as well as the 950ma LiPoly pack that Wild R/C sells. Both work great but the poly pack lasts forever! Keep the throws down for your first flights and use exponential. It weighs 4.5 ounces with the poly pack and flies great even at our higher (4850ft. msl) here in Idaho. Good luck!