Charging 5s Zippy packs with Cellpro 10s
#1
Thread Starter
Join Date: Oct 2002
Location: Houston, TX
Posts: 307
Likes: 0
Received 0 Likes
on
0 Posts
Charging 5s Zippy packs with Cellpro 10s
Hi Everyone,
I have a Cellpro 10S, and a number of Zippy 5s packs with the JST balance leads. What I'm wondering is how you guys manage to charge the Zippy/Align packs with this charger? - (I don't know what specific adapter I need (and where to get them) for my batteries...)
Thanks,
Ken
I have a Cellpro 10S, and a number of Zippy 5s packs with the JST balance leads. What I'm wondering is how you guys manage to charge the Zippy/Align packs with this charger? - (I don't know what specific adapter I need (and where to get them) for my batteries...)
Thanks,
Ken
#2
Senior Member
Join Date: Mar 2003
Location: Perth, AUSTRALIA
Posts: 1,881
Likes: 0
Received 0 Likes
on
0 Posts
RE: Charging 5s Zippy packs with Cellpro 10s
Ken, if you jump onto the revoletrix website, they sell adapters that plug into the side of the cellpro.
one 5s pack goes into one channel and the other 5s into the other.
I'll check when I get home (if someone doesn't beat first) as to what the part no's are.
Did you grab the PC interface thingy?
BTW, what's this going into?
one 5s pack goes into one channel and the other 5s into the other.
I'll check when I get home (if someone doesn't beat first) as to what the part no's are.
Did you grab the PC interface thingy?
BTW, what's this going into?
#3
RE: Charging 5s Zippy packs with Cellpro 10s
Hi Ken,
The local distributor for Cellpro is Tates. You can buy direct from them or you could try Model Sports over here in NSW.
You'll probably want the TP/Pollyquest balance boards.
Cheers,
Jason.
The local distributor for Cellpro is Tates. You can buy direct from them or you could try Model Sports over here in NSW.
You'll probably want the TP/Pollyquest balance boards.
Cheers,
Jason.
#4
Senior Member
Join Date: Nov 2004
Location: Albuquerque,
NM
Posts: 214
Likes: 0
Received 0 Likes
on
0 Posts
RE: Charging 5s Zippy packs with Cellpro 10s
The adaptor I use for the Zippy packs is the GP/KO. Part number is CP10S-GP/KO6S. You will need two of them to charge a 10S pack.
John
John
#5
Thread Starter
Join Date: Oct 2002
Location: Houston, TX
Posts: 307
Likes: 0
Received 0 Likes
on
0 Posts
RE: Charging 5s Zippy packs with Cellpro 10s
Thanks for the info guys...i've ordered 2 adapters from Revlectrix...
Rendegade, it's for a new Vanquish I've bought from DA Australia...it'll be a while before it's flight ready though, cause the delivery company (I suspect) weren't as careful as they should have been, and I had a cracked rudder and chin cowl. DA have been good with service and ordered replacement parts but it's taking a long time to get news from the factory...
Cheers,
KC
Rendegade, it's for a new Vanquish I've bought from DA Australia...it'll be a while before it's flight ready though, cause the delivery company (I suspect) weren't as careful as they should have been, and I had a cracked rudder and chin cowl. DA have been good with service and ordered replacement parts but it's taking a long time to get news from the factory...
Cheers,
KC
#6
Senior Member
Join Date: Mar 2003
Location: Perth, AUSTRALIA
Posts: 1,881
Likes: 0
Received 0 Likes
on
0 Posts
RE: Charging 5s Zippy packs with Cellpro 10s
Nice, one of the guys from WARMS was flying a blue one at the nats. I think it's a pretty competitive airframe in the right hands.