rgreen24

My Feedback: (6)

Is Marquet still making Spinners? Have not seen one on the F3A site in months. I still need one for my Spark Evo.

flying-michel

offcourse yes,
see ww.aerobertics.be

Jason Arnold

I'd like to see one for the Spark Dynamic. They are 64mm diameter.

Cheers,
Jason.

wagen017

I have used the Marquet spinner on the Dynamic. I think I used the 70mm?

Volkert

Jason Arnold

How was the fit?

wagen017

Have to check once I get home. Am travelling right now in the US.

Jason Arnold

Just measured my Krill spinner and it's 64mm. A 70mm spinner would be too big and therefor overhang the fuse quite a bit.

Might just have to make my own....

Cheers,
Jason.

wagen017

I have a Marquet spinner on my Sparks, so it must be available. You might want to drop a mail to Bert at Aerobertics.be

Volkert

Jason Arnold

Hi Volkert,

Just e-mailed Bert and got a reply already. They don't have the 64mm spinner but have, in the past, cut the nose back to suit the 80mm spinner. Not keen on taking to the nose with a tool....

Cheers,
Jason.

rcprecision

My Feedback: (6)

Robert,

Aero-Model Inc offers a line what they call Carbon-Lite spinners. They list a 63mm size. Could be worth a call to them for a full set of specs to see if it would work on the Spark.

Here's the link ...[link=https://www.aero-model.com/1_20_405/Accessories_Aero-Model-Carbon-Fiber-63mm-Spinner/AM%2063mm%20CL%20Spinner.html]Aero-Model 63mm spinner[/link]

mups53

My Feedback: (41)

We have an order in for spinners and should be back in stock soon if ya'll can wait a bit. Thanks Mike F3Aunlimited.com

flying-michel

phillippe marquet is my trainer f3A

wagen017

Jason, I measured the spinner, it is 70mm.

As it happens, my Spark has been build by Bert. I had another one (a Dynamic) which also had a 70mm spinner, so it seems more people do this.

Volkert