RCU Forums

RCU Forums (https://www.rcuniverse.com/forum/)
-   Electric Pattern Aircraft (https://www.rcuniverse.com/forum/electric-pattern-aircraft-385/)
-   -   Sebart Wind 110 (https://www.rcuniverse.com/forum/electric-pattern-aircraft-385/7905478-sebart-wind-110-a.html)

lablover 05-16-2012 12:06 PM

RE: Sebart Wind 110
 
Got another set of Batteries and the weight is off by 26 grams per battery. How bad does this affect me and the way the plane flies if Iplace them in the same spot as the lighter batteries? I thought I read here someplace that battery weight is not that critical because it's close to the CG??

Thanks guys



Jetdesign 05-16-2012 12:14 PM

RE: Sebart Wind 110
 
My batteries are different by 125g. I move them about 1 inch to compensate, from memory. I drew lines with a sharpie for each pack. If you are already against the rear former it shouldn't make much of a difference, especially to those of us in lower classes, but I would make a small effort to see if I can make both packs work with a common balance point.

lablover 05-16-2012 12:18 PM

RE: Sebart Wind 110
 
Yea, I think I'll move my RX pack back like you did. That way it will give me more room to move the main packs around. Iwish they would weigh what they advertise at...grrr

Oh well


Jetdesign 05-16-2012 12:18 PM

RE: Sebart Wind 110
 
I'm psyched to get some flying in this week. Its been rainy and windy on the weekends. I mounted an 18x12 on the Hacker 14L, should be really nice. My gut feeling is it will feel a little more crisp regarding throttle, coming from an 18x10.

lablover 05-16-2012 12:25 PM

RE: Sebart Wind 110
 
YEa, the rest of our week looks awesome too. I'm torn on what to bring to the field..Ihave a Sukhoi 100CC waiting to get into the air, now I'm playing with this wind :)


Jetdesign 05-16-2012 01:05 PM

RE: Sebart Wind 110
 
Me too, I electrified my Yak this year, really loved its maiden flight and want more. Its getting a custom cnc mount and neu motor next week, but I do want to try the aft cf location on the wind and see how I like it. I've got a lot of plans this summer so I need to get in some pattern practice. Not sure if flying the Yak in contests would cause an uproar or not, LOL.

lablover 05-16-2012 01:30 PM

RE: Sebart Wind 110
 
Just checked the CG with the new Batts...Phhhfftt Had to nudge them back about 1/4 inch LOL

Bill Clark 05-16-2012 02:29 PM

RE: Sebart Wind 110
 
Joe, have you taken an RPM reading on your 14l/18x10?

lablover 05-16-2012 02:42 PM

RE: Sebart Wind 110
 
Nope

Is there a ballpark I'm looking for?



Jetdesign 05-16-2012 03:30 PM

RE: Sebart Wind 110
 
I don't know why I can't seem to post the data log, but:

RPM: Average=4427, Max=7556
Current: Average=19.3A, Max=66.7A
Power: Average=555W, Max=1821W
Volts: Average=29.7, Max=32.8
Temp(first time looking at this!): Average=93, Max=121

lablover 05-16-2012 03:35 PM

RE: Sebart Wind 110
 
Thank you sir

Tomorrow is supposed to be a perfect fly day...Hmmm Wind or Sukhoi ??? Only room for one in the truck.


Jetdesign 05-16-2012 08:32 PM

RE: Sebart Wind 110
 
1 Attachment(s)
Bill - finally got it.

Bill Clark 05-17-2012 02:50 AM

RE: Sebart Wind 110
 


ORIGINAL: gaRCfield

I don't know why I can't seem to post the data log, but:

RPM: Average=4427, Max=7556
Current: Average=19.3A, Max=66.7A
Power: Average=555W, Max=1821W
Volts: Average=29.7, Max=32.8
Temp(first time looking at this!): Average=93, Max=121
Can you do a full throttle measurement while holding the plane next time you go out? I would like to see how the 300kv Hacker compares to my 300kv Futaba on the 18x10. You're using a Xoar, right? Castle data log- My static #s are 29.7v 68amps and 7255rpm 2 seconds after full throttle on a fresh TP 20c. that was 14 1/2lbs of thrust. My Eagletree shows 6 amps less which I think is more accurate

Bill Clark 05-17-2012 03:01 AM

RE: Sebart Wind 110
 
1 Attachment(s)


If I right click on the Castle data screen it freezes the cursor so I can get a snapshot of the numbers. I usethe free version ofPrintkey for screen shots</p>

Bill Clark 05-17-2012 03:07 AM

RE: Sebart Wind 110
 
1 Attachment(s)


this is better</p>

lablover 05-17-2012 03:24 AM

RE: Sebart Wind 110
 
I gotta check taht today when I get back from the field....Which BTW I'm leaving now :)



Jetdesign 05-17-2012 04:01 AM

RE: Sebart Wind 110
 
Bill, that was with an APC 18x10. I've got an 18x12 on there now ready for next flying day, but I'll probably bring the 18x10. I'll take more data either way.

Static usually pulls more amps.

lablover 05-17-2012 05:17 PM

RE: Sebart Wind 110
 
Ilooked at my data and its obviously wrong. The prev owner had it set for 2 pole motor. How many poles is the HAcker A50-16L?

Did have a odd takeoff on one flight. Got about 2 feet off the ground and all of the sudden t goes full right aileron for just a sec..Isaved it thank god but not sure why that happened? One of the guys at the field said it was a good old fasioned glitch? Futaba 2.4.. Freaked me out, sort of dont trust it now

Bill Clark 05-17-2012 05:58 PM

RE: Sebart Wind 110
 
I would be doing and extensive range check and probably replace the rx but thats just me. 2.4 aint supposed to do that

Jetdesign 05-17-2012 06:02 PM

RE: Sebart Wind 110
 
14 poles.

lablover 05-17-2012 06:30 PM

RE: Sebart Wind 110
 
Yea, Iwas afraid of that...Dang those things get expensive. Several guys at the club are using the Orange Hobby King ones but Ican't bring myself to trust them at all.

Hmmm, maybe I should try :)



ORIGINAL: Bill Clark

I would be doing and extensive range check and probably replace the rx but thats just me. 2.4 aint supposed to do that

lablover 05-17-2012 06:35 PM

RE: Sebart Wind 110
 
Thanks a Million


ORIGINAL: gaRCfield

14 poles.

Jetdesign 05-17-2012 06:50 PM

RE: Sebart Wind 110
 
I would not use hobby king over futaba in a nice plane

Rendegade 05-17-2012 09:05 PM

RE: Sebart Wind 110
 
I trust those orange RX's as far as i can throw them, which thankfully is about the required range of a parkie:D

lablover 05-18-2012 02:51 AM

RE: Sebart Wind 110
 
Time for a new Futaba RX..Hmm, Icould rob from peter to pay paul. I'm sure Ihave a plane that never gets flown and has a RX in it.

I Did have a small fray in a servo extension for the ailerons. Ichanged it out. Iwonder if tha could of done something? Changed out all extensions and might as well do the RX for good measure.

Maybe it was wind shear...LMAO




All times are GMT -8. The time now is 01:53 AM.


Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.