Question about the Logo 10
08-07-2003, 11:49 PM
#1
Junior Member
Thread Starter
Join Date: Jan 2003
Location: Seattle,
WA
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
Question about the Logo 10
I wanted to know what type of servo arms are you using? The heli came with a set of jr micro ds368s but in the manual it says to use the hole that is 18mm away from the center of the arm. Do I have to buy different servo arms or can I just use the ones that came with the servos? Oh and when I get to the ccpm setup part I'm gonna need help with that also. I have a JR 10x and I never used it b4 so I don't know how to set it up. Thanks for the help.
Shawn
Shawn
08-08-2003, 12:20 AM
#2
Senior Member
My Feedback: (3)
Join Date: Dec 2001
Location: Newark,
OH,
Posts: 304
Likes: 0
Received 0 Likes
on
0 Posts
Question about the Logo 10
Du-Bro makes longer servo arms and you will need them. Cant help you on the 10X, I am a Futaba man. You will love your Logo10!!!!
08-08-2003, 02:47 AM
#3
Member
My Feedback: (1)
Join Date: May 2003
Location: richmond,
KY
Posts: 73
Likes: 0
Received 0 Likes
on
0 Posts
Question about the Logo 10
Check out this forum. It is a little more Logo specific. Lots of good info.
Logo heli
You will probably have to get different horns for the servos. I would suggest metal ones, they are thinner yet stronger.
Charley
Logo heli
You will probably have to get different horns for the servos. I would suggest metal ones, they are thinner yet stronger.
Charley
