SIM
#1
Thread Starter
Junior Member
Joined: Nov 2003
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
From: WA
Hi, can anyone recommend a good sim, My controller does not have a P.C. cable so I would like to find something that comes with a control box. (Don't want to learn to fly on a key board)
Thanx
Thanx
#2
Senior Member
Joined: Mar 2003
Posts: 141
Likes: 0
Received 0 Likes
on
0 Posts
From: Tulsa, OK,
Realflight G2 is about the best...it does come with a controller and of course the software.
You can look on www.towerhobbies.com or maybe EBay
tomflier
You can look on www.towerhobbies.com or maybe EBay
tomflier
#6
Junior Member
Joined: Sep 2003
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
From: Melbourne, AUSTRALIA
I ended up buying an old attack 4 Radio, took out all its in sides and changed the potentiometer and basically turned it into a Joy Stick that works with any PC any program. I used FMS to learn to fly, it freeware.
Cheers
Paul
Cheers
Paul
#7
Member
Joined: Sep 2003
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
From: Larvik, NORWAY
What type of control do you have?
I have an Smartech that came with my aero hawk.
i only needed a 10k ohm resistor and a cabel.
you only need to solder 2 wires.
I lent a ikarus aerofly pro, with a interface, and that works greate.
But i also have a printer cabel interface(self made) for FMS.
If you have a smartech controll i can help you.
Aerofly is much better than the FMS, but you need the interface that costs 20$, and take a copy of a friends aerofly
I have an Smartech that came with my aero hawk.
i only needed a 10k ohm resistor and a cabel.
you only need to solder 2 wires.
I lent a ikarus aerofly pro, with a interface, and that works greate.
But i also have a printer cabel interface(self made) for FMS.
If you have a smartech controll i can help you.
Aerofly is much better than the FMS, but you need the interface that costs 20$, and take a copy of a friends aerofly




