FP heli flybar paddles
12-05-2004, 05:22 PM
#1
Junior Member
Thread Starter
Join Date: Dec 2004
Location: , UNITED KINGDOM
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
FP heli flybar paddles
On my dragonfly should the paddles on the flybar be set to 0 degrees or somthing different.
I have read on the internet that they should be set to 0degs / 2 degs / 5 degs / 10degs etc...
Thanks
mark
I have read on the internet that they should be set to 0degs / 2 degs / 5 degs / 10degs etc...
Thanks
mark
12-06-2004, 02:21 AM
#2
Member
My Feedback: (1)
Join Date: Nov 2004
Location: Rialto,
CA
Posts: 52
Likes: 0
Received 0 Likes
on
0 Posts
RE: FP heli flybar paddles
mark3000;
On my FP clone I have always set mine horizontal (-0-) with the tailboom and it works fine. I have seen recommendations on a slight positive setting, but have never found the need to try it.
Hold the helicopter upside down and adjust the paddles inline with the tailboom. Do one paddle, then rotate the around to the second paddle. Double check and you're set to fly.
On my FP clone I have always set mine horizontal (-0-) with the tailboom and it works fine. I have seen recommendations on a slight positive setting, but have never found the need to try it.
Hold the helicopter upside down and adjust the paddles inline with the tailboom. Do one paddle, then rotate the around to the second paddle. Double check and you're set to fly.
