Alternative Aero fly flight sim interface
11-21-2005 | 03:31 PM
#1
Thread Starter
Member
Joined: Dec 2004
Posts: 72
Likes: 0
Received 0 Likes
on
0 Posts
From: st pauls, SAINT HELENA
Alternative Aero fly flight sim interface
Hi All, will the FMS USB Interface Cable with Type U3 connector (Futaba FM DIN6) work with the Aerofly simulators. i was given one as a gift but it did not include an interface cable for some reason
This 'prospective' interface is available at helihobby PART# FMS-U3.
http://www.helihobby.com/html/fms_interfaces.html
Any help will be greatly appreciated, Thanks alot....Ice
This 'prospective' interface is available at helihobby PART# FMS-U3.
http://www.helihobby.com/html/fms_interfaces.html
Any help will be greatly appreciated, Thanks alot....Ice
11-25-2005 | 09:23 AM
#3
Senior Member
My Feedback: (2)
Joined: Sep 2004
Posts: 7,457
Likes: 0
Received 0 Likes
on
0 Posts
From: Johns Creek,
GA
RE: Alternative Aero fly flight sim interface
to clarifly... other "interfaces" will work... meaning other controllers....
BUT you still must have the origianal AFP(D) cable (sometimes refered to as a dongle, but that jsut sounds wrong
) plugged in to the computer... the cable is designed for copyright protection.....
so long story short..... AFP without the cable will not work
BUT you still must have the origianal AFP(D) cable (sometimes refered to as a dongle, but that jsut sounds wrong
) plugged in to the computer... the cable is designed for copyright protection.....so long story short..... AFP without the cable will not work
