Elevation's effects on mini's/micros?
02-12-2007 | 01:49 PM
#1
Thread Starter
Joined: Apr 2004
Posts: 1,270
Likes: 0
Received 0 Likes
on
0 Posts
From: Tyler, TX TX
Elevation's effects on mini's/micros?
This may be a newbie post, but has anyone had any experience with helis such as the blade cx/cp or heli-max axe ez/cp in elevations close to 1 mile up? I've never flown in a high elevation environment, and I'm thinknig about having my heli sent to me. I'm wondering if such a high elevation would keep any of the above birds on the ground. I have the Axe CP, but there is at least one other person here that has a blade cx. He's been having trouble getting it more than a couple of inches off of the ground. Then again, is cx needs a bit of work to. Thanks for any input.
02-13-2007 | 04:03 AM
#2
Senior Member
Joined: May 2003
Posts: 253
Likes: 0
Received 0 Likes
on
0 Posts
From: Co
RE: Elevation's effects on mini's/micros?
ORIGINAL: mydartswinger
This may be a newbie post, but has anyone had any experience with helis such as the blade cx/cp or heli-max axe ez/cp in elevations close to 1 mile up? I've never flown in a high elevation environment, and I'm thinknig about having my heli sent to me. I'm wondering if such a high elevation would keep any of the above birds on the ground. I have the Axe CP, but there is at least one other person here that has a blade cx. He's been having trouble getting it more than a couple of inches off of the ground. Then again, is cx needs a bit of work to. Thanks for any input.
This may be a newbie post, but has anyone had any experience with helis such as the blade cx/cp or heli-max axe ez/cp in elevations close to 1 mile up? I've never flown in a high elevation environment, and I'm thinknig about having my heli sent to me. I'm wondering if such a high elevation would keep any of the above birds on the ground. I have the Axe CP, but there is at least one other person here that has a blade cx. He's been having trouble getting it more than a couple of inches off of the ground. Then again, is cx needs a bit of work to. Thanks for any input.
