RCU Forums

RCU Forums (https://www.rcuniverse.com/forum/)
-   Electric RC Helis (https://www.rcuniverse.com/forum/electric-rc-helis-167/)
-   -   Highest voltage for blade cp electronics? (https://www.rcuniverse.com/forum/electric-rc-helis-167/3597106-highest-voltage-blade-cp-electronics.html)

terrible 11-28-2005 07:33 PM

Highest voltage for blade cp electronics?
 
I'm going to build a few packs for my blade cp and I need to know how much voltage the stock electronics can handle. I plan on using some 2/3a matched cells in either 1100 or 1150mah ratings. I can use 8-10 cells but I don't want to fry any electronics.

exeter_acres 11-28-2005 07:34 PM

RE: Highest voltage for blade cp electronics?
 
it runs fine on 3 cell LiPo, and that is 12.6V
if that helps

kennyandannie 11-28-2005 07:36 PM

RE: Highest voltage for blade cp electronics?
 
Hey Exeter,

It runs fine on 3 cells, but I still can't fly the darn thing:)

Ken

Motions 11-28-2005 07:37 PM

RE: Highest voltage for blade cp electronics?
 
Are you building lipos or NiMh packs? I wouldn't go far above 12vdc.
4-cell lipos at 14vdc would really be pushing it and would fry the 4-in-1 eventually.

terrible 11-28-2005 08:23 PM

RE: Highest voltage for blade cp electronics?
 
lipos don't come in "A" ratings. hence the 2/3a I am using. They are super cheap at $0.98 a cell and I don't have to buy a special charger.

Thanks for the info guys!

Motions 11-28-2005 08:31 PM

RE: Highest voltage for blade cp electronics?
 
Gotcha. I built 9-cell NiMh packs for my blade. They run really good, better than the 8-cell stock batteries. Upgraded to lipos now and it's almost impossible to go back to NiMh after you fly with those.

terrible 11-28-2005 08:42 PM

RE: Highest voltage for blade cp electronics?
 
What kind of cells did you use? Did the added weight seem to hurt much?

Motions 11-28-2005 08:53 PM

RE: Highest voltage for blade cp electronics?
 
Actually, since I was using my first heli, DF#4, as spare parts (crappy machine) I had 3 stock 7-cells from that one.

I split 1 battery up and added 2 cells each to the other 2 packs making 2 9-cells packs. Confused yet?
The DF#4 has those green 7-cell battery packs. Configuration below.

O O O O
O O O

After adding 2 cells to each one they look like this:

O O O O
O O O
O O

The weight of 1 extra cell is no problem at all.

E_Heli 11-29-2005 02:38 PM

RE: Highest voltage for blade cp electronics?
 
I flew with 9 cells on my Blade CP with the aero kit and then switch over to 10C 3S 900maH lipo. What a day and night different; with the lipo pack, you don't have to deal with the constant tail trimming problem and you can feel she's lighter and more responsive.


All times are GMT -8. The time now is 06:11 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.