RCU Forums - how to set tracking on blade cp

RCU Forums (https://www.rcuniverse.com/forum/)

- Electric RC Helis (https://www.rcuniverse.com/forum/electric-rc-helis-167/)

- - how to set tracking on blade cp (https://www.rcuniverse.com/forum/electric-rc-helis-167/3693047-how-set-tracking-blade-cp.html)

gottabfordtough

12-26-2005 12:13 PM

how to set tracking on blade cp

i just had to put my 1st set of blades on my new cp, and one is tracking higher than the other about 1/4", im at awork and can't remember how to get the low blade to rise up.and ofcourse left my manual at hom. i tried to tape the high one i rememberd that but it didn't seem to fase it unless i needed more tape. i wraped the tip twice with scotch tape. please help. thakns.

fire@forthall

12-26-2005 12:18 PM

RE: how to set tracking on blade cp

low blade you need to unscrew one half turn at a time in the linkage at the blade grip

gottabfordtough

12-26-2005 12:37 PM

RE: how to set tracking on blade cp

worked perfect thanks. ,

Quote:

ORIGINAL: fire@forthall

low blade you need to unscrew one half turn at a time in the linkage at the blade grip

All times are GMT -8. The time now is 07:40 PM.