how to set tracking on blade cp
12-26-2005 | 12:13 PM
#1
Thread Starter
Senior Member
Joined: Apr 2005
Posts: 109
Likes: 0
Received 0 Likes
on
0 Posts
From: indianapoli,
IN
how to set tracking on blade cp
i just had to put my 1st set of blades on my new cp, and one is tracking higher than the other about 1/4", im at awork and can't remember how to get the low blade to rise up.and ofcourse left my manual at hom. i tried to tape the high one i rememberd that but it didn't seem to fase it unless i needed more tape. i wraped the tip twice with scotch tape. please help. thakns.
12-26-2005 | 12:37 PM
#3
Thread Starter
Senior Member
Joined: Apr 2005
Posts: 109
Likes: 0
Received 0 Likes
on
0 Posts
From: indianapoli,
IN
RE: how to set tracking on blade cp
worked perfect thanks. ,
ORIGINAL: fire@forthall
low blade you need to unscrew one half turn at a time in the linkage at the blade grip
low blade you need to unscrew one half turn at a time in the linkage at the blade grip
