Thrust Numbers?? 3D EDF??
11-28-2005 | 05:42 PM
#1
Thread Starter
Senior Member
Joined: Oct 2002
Posts: 277
Likes: 0
Received 0 Likes
on
0 Posts
From: Frederick,
MD
Thrust Numbers?? 3D EDF??
Hey guys,
I have never messed around with ducted fans what so ever, but I love experimenting with designs for park flying electrics. I'm mainly into 3D prop flying and want to get as close to a 3D EDF as I can. My main question is what kind of thrust can I get from a fairly light EDF setup? I'd ideally be looking for something in the 20-25 Oz. of static thrust range. What EDF units and motors do you suggest? Has anybody else designed something along these lines?
Thanks,
Todd
I have never messed around with ducted fans what so ever, but I love experimenting with designs for park flying electrics. I'm mainly into 3D prop flying and want to get as close to a 3D EDF as I can. My main question is what kind of thrust can I get from a fairly light EDF setup? I'd ideally be looking for something in the 20-25 Oz. of static thrust range. What EDF units and motors do you suggest? Has anybody else designed something along these lines?
Thanks,
Todd
11-28-2005 | 06:04 PM
#2
Senior Member
Joined: Jul 2004
Posts: 192
Likes: 0
Received 0 Likes
on
0 Posts
From: OCALA, FL
RE: Thrust Numbers?? 3D EDF??
my friend joe has designed a few versions of a 3d jet, go into rcgroups under ducted fan jets and click on the post "3d jets are we there yet TONS of useful info. The fan he uses is a WeMoTec Microfan with a razor motor
