133% SHumate F-15. Flies great!
#1
Senior Member
Thread Starter
Join Date: Mar 2004
Location: Moorpark,
CA
Posts: 650
Likes: 0
Received 0 Likes
on
0 Posts
133% SHumate F-15. Flies great!
Here's the newest in the hanger. Made from 133% Shumate plans, FFF, & pink foam. 39" WS, 54" L. RUnning a BP 36mm, 1410kv outrunner, on a 4s, 3000mah, 20c Lipo & an APC 8X4e prop. I'm running a 3amp UBEC, with a 900mah, 2s Lipo for Rx/servo power. 475watts WOT on a fresh batt. 48.5oz AUW.Very stable and majestic flyer. Happy flying.
Rick
Rick
#4
Senior Member
Thread Starter
Join Date: Mar 2004
Location: Moorpark,
CA
Posts: 650
Likes: 0
Received 0 Likes
on
0 Posts
RE: 133% SHumate F-15. Flies great!
Thanks guys for the kind complements. A very fun project. I tried to duplicate the 71st fighter squadren from Langely AFB Va. They're called the IRONMEN. One of the few F-15 squadrens still active as they're being replaced by the F-22. Thanks again. Happy flying.
Rick
Rick
#7
Join Date: May 2007
Location: Chillicothe
Posts: 180
Likes: 0
Received 0 Likes
on
0 Posts
RE: 133% SHumate F-15. Flies great!
Dude - I want your armament for my GWS-15. Your whole bird looks amazing!
Very well done..
OK now seriously - Armament.. how? Who, Where, When? haha
Very well done..
OK now seriously - Armament.. how? Who, Where, When? haha
#8
Senior Member
Thread Starter
Join Date: Mar 2004
Location: Moorpark,
CA
Posts: 650
Likes: 0
Received 0 Likes
on
0 Posts
RE: 133% SHumate F-15. Flies great!
Surjer,
I made them from thin wall carbon fiber tubing. The nose is a small piece of pine dowel, and the fins are 1.5mm depron. The carrier is made from 1/4" & 3/16" balsa sheet. hAVE FUN.
Rick
I made them from thin wall carbon fiber tubing. The nose is a small piece of pine dowel, and the fins are 1.5mm depron. The carrier is made from 1/4" & 3/16" balsa sheet. hAVE FUN.
Rick