Tazor sport jet
#1
Member
Thread Starter
Join Date: May 2007
Location: Braintree, , UNITED KINGDOM
Posts: 46
Likes: 0
Received 0 Likes
on
0 Posts
Tazor sport jet
Here is a few pictures of the Tazor Sport jet.
It will be all composite and produced in Europe (yes, we still build stuff!)
12-12s DS75 165mm long 145mm span production weight on 10s about 12 Lbs
This is the prototype which is a bit "Porky" at 13.5 Lbs due to the constructional techniques used.
The Guys in the picture giving it some scale are my chief designer Rainer Holzman and his costructional Guru Michael Knes, both based in Austria
http://www.youtube.com/v/hnF-JhWK5JA
It will be all composite and produced in Europe (yes, we still build stuff!)
12-12s DS75 165mm long 145mm span production weight on 10s about 12 Lbs
This is the prototype which is a bit "Porky" at 13.5 Lbs due to the constructional techniques used.
The Guys in the picture giving it some scale are my chief designer Rainer Holzman and his costructional Guru Michael Knes, both based in Austria
http://www.youtube.com/v/hnF-JhWK5JA
#3
Junior Member
Join Date: Sep 2005
Location: KaringalVIC, AUSTRALIA
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
RE: Tazor sport jet
Hello WW, the Tazor does look good, I have been following your series on HP EDF in RCJI with great interest. I am about to start an edf conversion to a KeeCat using a Stumax unit on 12s, should be fun.
Is the Tazor available yet, I occasionally do a search on Google for it, but nothing comes up.
cheers
Stephen
Is the Tazor available yet, I occasionally do a search on Google for it, but nothing comes up.
cheers
Stephen