40mm EDF - What to use?
Hi guys. Im rebuilding a kyosho F-4 Phantom into an E/F variant (long nose plus gun). I am totally unhappy with EDF performance...the 55mm fan does not output a whole lot of "Jet" power, its more of an allround cruiser not meant to gain much altitude. Any vertical maneuver - forget it.
I have re-equipped one with a 50mm wemotec fan, but not much gain there either.....i strongly suspect that without a closed duct and a better splitting in the channel aft of the fan, i will not gain much power in any way. Soooo where did my thoughts go? Eeeexactly: fully ducted twin EDF. I can fit 40mm fans in there, and come up with a lightweight ducting. Now to my problem: what is there to buy in the 40mm segment? Option A: Dr. MadThrust 40mm 8-blade unit, 8000rpm/v and 400g thrust (around 1lb) specified. Optimistic, but why not..... Option B: ChangeSun 12blade 40mm unit. Motor? Nothing to be found.....Specs? Nothing to be found.... Option C: Open to suggestions! :) Glad to hear some experiences, hints or pointers Cheers Hank |
best bet for info:
try the rcg foam edf forums, mini is for less than 50mm |
Horizon Hobby part number FMDF005
|
|
This is another action of 40mm Mystery fan running on 2S. Rather noisy after sucking all the beach sand during beach landings but no sign of loss of power.
https://cimg6.ibsrv.net/gimg/www.rcu...b0badd98c6.jpg Beside few other mini jets. |
This is another action of 40mm Mystery fan running on 2S. Rather noisy after sucking all the beach sand during beach landings but no sign of loss of power.
https://cimg6.ibsrv.net/gimg/www.rcu...b0badd98c6.jpg Beside few other mini jets. |
All times are GMT -8. The time now is 01:38 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.