Thanks to you all.
#1
Member
Thread Starter
Join Date: Feb 2012
Location: ChristchurchNot Applicable, NEW ZEALAND
Posts: 92
Likes: 0
Received 0 Likes
on
0 Posts
Thanks to you all.
I just want to say, thanks to all who have given me advise, and help. It is supprising just how much you learn from reading these forums, and elsewhere.
Just in the short time having my Blade 450, how much I have learned from advise here and a bit of reading, but the learning curve is steep and in this hobby. I thought I had better send for a basic tool kit, which I did through Ebay and a couple of spare rear rotor blades for my Blade450, as these seem prone to stricking the ground, so chipping the ends slightly, mine has chipped slightly allready, flying on lawn.
So thanks to everyone.
Just in the short time having my Blade 450, how much I have learned from advise here and a bit of reading, but the learning curve is steep and in this hobby. I thought I had better send for a basic tool kit, which I did through Ebay and a couple of spare rear rotor blades for my Blade450, as these seem prone to stricking the ground, so chipping the ends slightly, mine has chipped slightly allready, flying on lawn.
So thanks to everyone.