Multiplex ESC Beeping - Easystar
03-20-2006 | 01:42 AM
#1
Thread Starter
Senior Member
My Feedback: (3)
Joined: Sep 2005
Posts: 368
Likes: 0
Received 0 Likes
on
0 Posts
From: Somewhere,
AZ
Multiplex ESC Beeping - Easystar
I took out all the electronics out of the Easystar and am making a GWS Slowstick. I have everything assembled now. When I plug in the battery to the speed control there is an LED blinking and a beep...beep. The servors don't move, the motor does not move. Fully charged and checked battery, OK.
What am I missing?
What am I missing?
03-20-2006 | 10:27 AM
#2
Member
Joined: Jan 2006
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
From: , AUSTRALIA
RE: Multiplex ESC Beeping - Easystar
An easystar? Haha.. sorry.
Have you plugged the speed control BEC lead to the receiver in the wrong way?
Yellow wires on all three point towards the crystal. Worth checking.
Have you plugged the speed control BEC lead to the receiver in the wrong way?
Yellow wires on all three point towards the crystal. Worth checking.
