Component Compatability Help
10-20-2006, 08:48 PM
#1
Member
Thread Starter
Join Date: Sep 2006
Location: Fredericksburg,
VA
Posts: 92
Likes: 0
Received 0 Likes
on
0 Posts
Component Compatability Help
I have EasyStar, that I plan to use the componants off of. It has Hitec RX. I just purchased a JR 7202 TX. If I buy a GWS reciever for JR, will my servos and ESC plug into it.
10-21-2006, 09:56 AM
#2
Senior Member
Join Date: Jul 2002
Location: Omaha, NE
Posts: 354
Likes: 0
Received 0 Likes
on
0 Posts
RE: Component Compatability Help
Yep!!!
Just make sure you get the JR shift RX. Will have a "J" on the case. Plugs for the servos and ESC are compatible for all major brands now. On some servo amd Esc wires Brown is neg and some use black as neg .
Good Luck
Bob
Just make sure you get the JR shift RX. Will have a "J" on the case. Plugs for the servos and ESC are compatible for all major brands now. On some servo amd Esc wires Brown is neg and some use black as neg .
Good Luck
Bob
