new to planes,Need a little help.
03-13-2009 | 03:41 PM
#1
Thread Starter
Junior Member
Joined: Mar 2009
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
From: , MI
new to planes,Need a little help.
Hi, I am new to planes and live in the metro Detroit area,I am a heli pilot amd have wanted to try a fomey so I bought a IF jet and after a little glue it is rx ready.I would pay a local person with a little help with set up witha 9 or 10c rx.I know there are a lot of good people out there and I would live to thank you in addvance.
Philip.
Philip.
03-26-2009 | 10:03 AM
#3
Junior Member
Joined: Mar 2009
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
From: Brighton, UNITED KINGDOM
RE: new to planes,Need a little help.
ORIGINAL: MajorTomski
Philp, you might consider reposting in the electric area, this thread is for full scale aviation
Philp, you might consider reposting in the electric area, this thread is for full scale aviation
03-26-2009 | 10:48 AM
#4
My Feedback: (2)
RE: new to planes,Need a little help.
I strongly suggest you seek out the clubs in your area. If you don't know how to find them, click on the AMA link below for the national club listing
http://www.modelaircraft.org/clubsearch.aspx
Remember that the address given is the home of a member, not the location of the field. The address for our club is 18 miles away, but the field is 1 mile from my house.
http://www.modelaircraft.org/clubsearch.aspx
Remember that the address given is the home of a member, not the location of the field. The address for our club is 18 miles away, but the field is 1 mile from my house.
