wt-227f
#1
Senior Member
Thread Starter
Join Date: Feb 2004
Location: Cross Lanes,
WV
Posts: 113
Likes: 0
Received 0 Likes
on
0 Posts
wt-227f
Would this be a good carb for my 31cc Ryobi?
I measured 9.53mm venturi, but don't know if I will experience any problems with this carb.
any help appreciated.
I measured 9.53mm venturi, but don't know if I will experience any problems with this carb.
any help appreciated.
#3
Member
My Feedback: (1)
Join Date: Jun 2004
Location: Walker,
LA
Posts: 40
Likes: 0
Received 0 Likes
on
0 Posts
RE: wt-227f
http://www.walbro.com/pdf/DiaphragmCarb.pdf
This is a site that was sent to me by a friend that gives some of the Walbro carb specs.
W5RA
This is a site that was sent to me by a friend that gives some of the Walbro carb specs.
W5RA