zenoah muffler
#2
Senior Member
My Feedback: (29)
Join Date: Jan 2005
Location: San Antonio,
TX
Posts: 1,402
Likes: 0
Received 0 Likes
on
0 Posts
RE: zenoah muffler
Keyman,
You should have given the distance between the holes. If they are the same any difference in the port shape can be overcome with a simple slip on plate the shape of the exhust. It can be made of aluminum or brass etc. The Homelite 25/30/33 and Ryobi 31 are 1.5 inches and interchangeable. This is common. The Echo/Zenoah and 25cc Toro's are about 1.3 inches and differences can be adjusted with a small round swiss file.
Dave
You should have given the distance between the holes. If they are the same any difference in the port shape can be overcome with a simple slip on plate the shape of the exhust. It can be made of aluminum or brass etc. The Homelite 25/30/33 and Ryobi 31 are 1.5 inches and interchangeable. This is common. The Echo/Zenoah and 25cc Toro's are about 1.3 inches and differences can be adjusted with a small round swiss file.
Dave