|
RE: CDI gr8flyer55
ok thank you.<span lang="en" class="short_text" id="result_box"><span class="hps">I</span> <span class="hps">will use the</span> <span class="hps">US5881 hall effect switch and 12f683.
www.melexis.com/Hall-Effect-Sensor-ICs/Hall-Effect-Unipolar-Switches-/US5881-148.aspx </span></span> |
RE: CDI gr8flyer55
Hi ustura kemal
<span lang="en" id="result_box"><span class="hps">I</span> <span class="hps">recommend</span><span>, dc</span><span class="atn">-</span><span>dc converter</span><span>-specific</span> <span class="hps">transistor.</span> <span class="hps">2SC5707</span><span>. </span></span><span lang="en" id="result_box" class="short_text"><span class="hps">The</span> <span class="hps">circuit</span> <span class="hps">board</span> <span class="hps alt-edited">be created</span> <span class="hps">on</span> <span class="hps">cooling</span></span><span lang="en" class="short_text" id="result_box"><span>.http://www.rcuniverse.com/forum/js/f...sn/thumbup.gif</span></span> <span lang="en" id="result_box"><span> Regards nyemi </span></span> |
RE: CDI gr8flyer55
1 Attachment(s)
|
RE: CDI gr8flyer55
1 Attachment(s)
Hi
<span lang="en" class="long_text" id="result_box"><span class="hps">I</span> <span class="hps">recommend</span> <span class="hps">2SC5707</span><span>.</span> <span class="hps">For</span> <span class="hps">specific</span> <span class="hps">DC</span><span>-DC</span> <span class="hps">inverter</span> <span class="hps">transistor. </span></span><span lang="en" class="long_text short_text" id="result_box"><span class="hps">CCFL</span> <span class="hps">inverters</span> <span class="hps">are used</span><span>.</span> <span class="hps">Try a search on</span> <span class="hps">Google</span><span>.(CCFL inverters 2SC5707-Royer converter) </span></span><span lang="en" class="long_text short_text" id="result_box"><span class="hps">I</span> <span class="hps">CCFL</span> <span class="hps">inverter</span><span>,</span> <span class="hps">to solve</span> <span class="hps">the</span> <span class="hps">ignition</span> <span class="hps">power</span><span>. </span></span><span lang="en" class="long_text short_text" id="result_box"><span class="hps">I</span> <span class="hps">rewound</span> <span class="hps">to</span> <span class="hps atn">the transformer (</span><span>EE19</span> <span class="hps">ferrite</span> <span class="hps">core)</span><span>.</span></span> Primary coil not replace. Secondary coil replace : 100 turns (0.25 copper wire). <span lang="en" id="result_box" class="long_text"><span class="hps">I tell you,</span> <span class="hps">Royer,</span> <span class="hps">push pull</span> <span class="hps">inverter</span> <span class="hps">is more suitable</span><span>.</span></span> <span lang="en" class="long_text short_text" id="result_box"><span class="hps">Project</span> <span class="hps">is not over yet</span><span>.</span> <span class="hps">More on that later</span><span>.</span></span> <span lang="en" class="long_text short_text" id="result_box"><span class="hps"> Link:www.mikrocontroller.net/wikifiles/f/f3/Royer_Converter.xls Link:www.mikrocontroller.net/articles/Royer_Converter </span></span> |
RE: CDI gr8flyer55
ok nyemi tnx .I'm try <span lang="en" class="long_text" id="result_box"><span class="hps">2SC5707.</span></span><span lang="en" class="short_text" id="result_box"><span class="hps">But first</span> <span class="hps alt-edited">a short video
This is my ignation board and works perfectly.</span></span><span lang="en" class="short_text" id="result_box"><span class="hps">but</span> <span class="hps">at higher rpm(12000-20000) bd911 very hot.</span></span><span lang="en" id="result_box" class="short_text"><span class="hps">Solves this problem</span><span>, perhaps</span> <span class="hps">2sc5707</span></span>. <span lang="en" class="short_text" id="result_box"><span class="hps alt-edited"> [youtube]http://www.youtube.com/watch?v=prcvIypVTnY&feature=youtu.be[/youtube] </span></span> |
RE: CDI gr8flyer55
Ustra, at low rpm, off time for transistor is long enough to not allow it to get hot. At high rpm 12,000 - 20,000 , on time is longer and makes the transistor run hotter. A heatsink will help on the transistor to run cooler. Also higher amperage rating of the 2sc5707 may help. Higher rpm draws more current, and makes more heat.
John |
RE: CDI gr8flyer55
HI
<span lang="en" class="short_text" id="result_box"><span class="hps">You</span> <span class="hps">look at</span> <span class="hps">this data.</span></span> Collector-Emitter Saturation Voltage |
RE: CDI gr8flyer55
thank you for project
working on asp .61 engine [youtube]http://www.youtube.com/watch?v=C-39Ixv6IOE[/youtube] |
RE: CDI gr8flyer55
Hi ustura_kemal
<span lang="en" id="result_box"><span class="hps">I</span> <span class="hps">congratulate you</span><span>.</span></span><span lang="en" id="result_box"><span class="hps">The engine</span> <span class="hps">is working</span> <span class="hps">well</span></span><span lang="en" id="result_box"><span>.http://www.rcuniverse.com/forum/js/f...sn/thumbup.gif</span> <span class="hps">Bravo</span><span>.</span> <span class="hps">I</span> <span class="hps">ask</span><span>.</span> <span class="hps">You</span> <span class="hps">use</span> <span class="hps">one</span> <span class="hps">ignition</span> <span class="hps">curve</span><span>?</span> <span class="hps">2T</span><span>-4T</span><span>,</span> <span class="hps">McCulloch</span><span>?</span> <span class="hps">Not a few</span><span>, software,</span> <span class="hps">12669</span> <span class="hps">rpm</span> <span class="hps">limit</span><span>?</span> <span class="hps">I</span> <span class="hps">create</span> <span class="hps">new software</span><span>,</span> <span class="hps">easy starting</span><span>,</span> <span class="hps">a higher</span> <span class="hps alt-edited">rpm</span> <span class="hps">limit.</span> <span class="hps">I</span> <span class="hps">send</span> <span class="hps">you,</span> <span class="hps">if</span> <span class="hps">you</span> <span class="hps">want.</span></span> |
RE: CDI gr8flyer55
ORIGINAL: gr8flyer55 Well Mr. Fly42, as I see it, you are complaining about something not working that you haven't even built and tried! If you need proof that it works, watch my video of it actually working before you say it doesn't work. As for the project itself, it is a ''do it yourself'' project. Which in turn means, you gather the parts, you make the circuit board, you program the chip with the provided hex file, then and ONLY then, you decide if it is not the project to fit your needs. If free is not cheap enough for you, then I would strongly suggest that you go out and spend your money on a commercially available ignition that fills your needs. I know you can't get RcExel to change a curve for your engine because you think it won't work without ever trying it. I stand my ground in defense of everyone participating in this DIY project. John Do ytou want another box. BCCHI |
RE: CDI gr8flyer55
For Ustura,
Congratulations !!! Good job done ! You modified the engine for gas ? For Nyemi Can you post a link to your new software version ? Thank, Dino |
RE: CDI gr8flyer55
Hi Bill,
Yes, I would like another box of goodies!! The last box was sure a surprise when I got it. I finished trouble shooting everything and have repaired them all. That undertaking was like a box filled with Christmas toys! Anything you want to send would be great. Thanks Bill ! John |
RE: CDI gr8flyer55
ORIGINAL: nyemi Hi ustura_kemal <span lang="en" id="result_box"><span class="hps">I</span> <span class="hps">congratulate you</span><span>.</span></span><span lang="en" id="result_box"><span class="hps">The engine</span> <span class="hps">is working</span> <span class="hps">well</span></span><span lang="en" id="result_box"><span>.http://www.rcuniverse.com/forum/js/f...sn/thumbup.gif</span> <span class="hps">Bravo</span><span>.</span> <span class="hps">I</span> <span class="hps">ask</span><span>.</span> <span class="hps">You</span> <span class="hps">use</span> <span class="hps">one</span> <span class="hps">ignition</span> <span class="hps">curve</span><span>?</span> <span class="hps">2T</span><span>-4T</span><span>,</span> <span class="hps">McCulloch</span><span>?</span> <span class="hps">Not a few</span><span>, software,</span> <span class="hps">12669</span> <span class="hps">rpm</span> <span class="hps">limit</span><span>?</span> <span class="hps">I</span> <span class="hps">create</span> <span class="hps">new software</span><span>,</span> <span class="hps">easy starting</span><span>,</span> <span class="hps">a higher</span> <span class="hps alt-edited">rpm</span> <span class="hps">limit.</span> <span class="hps">I</span> <span class="hps">send</span> <span class="hps">you,</span> <span class="hps">if</span> <span class="hps">you</span> <span class="hps">want.</span></span> Thank you for your reply.I use 2t 0-20380 rpm software .i am not use ignation curve :D only upload this software.Yes iwould like to your sowftware. KemaL <br type="_moz" /> |
RE: CDI gr8flyer55
ORIGINAL: dinoslmn For Ustura, Congratulations !!! Good job done ! You modified the engine for gas ? For Nyemi Can you post a link to your new software version ? Thank, Dino <br type="_moz" /> |
RE: CDI gr8flyer55
http://db.tt/5a4bRKCb
This is the 12,669 rpm version and has the easy start advance edited. If anyone needs a higher rpm limit hex file I'll change it and upload a link to that one also. This version works very well for all of my converted engines. Easy flip starts and great transition from low to high rpm. Let me know if the link is ok. John |
RE: CDI gr8flyer55
Hi
<span lang="en" class="short_text" id="result_box"><span class="hps">Thank</span> <span class="hps">gr8flyer55</span><span>.</span> <span class="hps">Here's</span> <span class="hps alt-edited">Read more</span><span>:www.4shared.com/zip/9eUd8_aS/file.html</span></span> <span lang="en" id="result_box"><span class="hps">The RPM</span> <span class="hps">limit :</span> <span class="hps">16164</span></span> |
RE: CDI gr8flyer55
Rossz letöltési link!
|
RE: CDI gr8flyer55
<span lang="en" id="result_box"><span class="hps">Hi</span> <span class="hps">Gompy</span>
<span class="hps">Thank you.</span> <span class="hps">Link</span> <span class="hps">work?</span> <span class="hps">I</span> <span class="hps">create</span> <span class="hps">five</span> <span class="hps">ignition</span> <span class="hps">curve</span> <span class="hps atn">(</span><span>Walbro</span> <span class="hps">pdf).</span> <span class="hps">I</span> <span class="hps">look forward to the</span> <span class="hps">tests.:)</span></span> |
RE: CDI gr8flyer55
1 Attachment(s)
Only if I log-in and thats wat I don't want todo.
|
RE: CDI gr8flyer55
Rob, I just waited til the download link appeared and was able to download the Walbro file.
|
RE: CDI gr8flyer55
<span id="result_box" lang="en"><span class="hps">I'm sorry.</span>
<span class="hps">instructions</span> <span class="hps">for downloading.</span> <span class="hps">Click on</span> <span class="hps">"Download</span> <span class="hps">Now"</span> <span class="hps atn">button (</span><span>blue</span><span>) -</span> <span class="hps">waiting</span> <span class="hps">time</span> <span class="hps">elapsed</span> <span class="hps">-</span> <span class="hps">Click on</span> <span class="hps">"Download</span> <span class="hps">file</span> <span class="hps">now"</span> <span class="hps">writing. </span></span><span id="result_box" class="short_text" lang="en"><span class="hps">Wish you</span> <span class="hps">a successful</span> <span class="hps">download</span><span>. Regards nyemi<br type="_moz"/></span></span> |
RE: CDI gr8flyer55
1 Attachment(s)
There is no time and after 15 minutes I quit.
|
RE: CDI gr8flyer55
Hi,
The link not work for me Nothing happen Dino |
RE: CDI gr8flyer55
Hi
<span lang="en" class="short_text" id="result_box"><span class="hps">I trust</span> <span class="hps">this is good.</span> <span class="hps">link:www.moto.com.ua/postphoto/archive/1090217_2.zip</span></span> |
RE: CDI gr8flyer55
Yes, this one I can download without signin.
Thanks |
| All times are GMT -8. The time now is 11:11 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.