Please help, Glow conversions basics?
 

Hi,

I am thinking about converting a small 21.2cc gas engine to glow. I see that you can buy or make a plug converter, but othe than that, does the cuurent Walbro type carb work without any mods? I understand it would have to be adjusted, but would the rubber inside not be attacked? This and any other information would be appreciated. Thanks, flyrc

RE: Please help, Glow conversions basics?
 

Have you considered the GGL gas/glow mix?
From what I gathered, the rubber doesnt get abused from the 1/3 glow alcohol... there is just enough methalol to get the plug to catalyst up.... but the other guys have better info than me.

RE: Please help, Glow conversions basics?
 

Do not worry about the alky with the walbro carb. Not going to bother mutch with 2/3 gas in mix. Capt,n

RE: Please help, Glow conversions basics?
 

Thats a good point, what exaclty DO you mix for a former Gas engine to run right as a glow? I guess less oil, and some gasoline is still used?

RE: Please help, Glow conversions basics?
 

Well, grab a beer or a soda and start reading; it's all here: http://www.rcuniverse.com/forum/m_12...page_31/tm.htm

Good luck and have fun,
AV8TOR

RE: Please help, Glow conversions basics?
 

I will have a ROOT BEER....Capt,n:D:D

RE: Please help, Glow conversions basics?
 

Thanks, I think, that thread needs a 6 pack to go along with it!

RE: Please help, Glow conversions basics?
 

I dont want to spoil the suprise ending of that thread, but the solution is so dang simple it will amaze you.
I mean really really really simple.