I just bought that Esky simulator pack and i have to say the software on it is fairly ordinary.

my question is will the Esky transmitter be able to go on the phoenix RC sim or real flight sim.

they seem to be the best sims out there.

RealFlight comes with a fake TX, so that one's a non-issue. I believe it works with Phoenix, but I KNOW it works with Clearview.

it will not work with realflight.. but here is a free sim that is suppose to be better the fms..jake


[link=http://www.marksfiles.net/HeliSimRC/index.htm]http://www.marksfiles.net/HeliSimRC/index.htm[/link]

Hi,

I have esky usb radio and it works just fine with realflight g3 and g3.5. Phoenix sim is not working with that, at least i have not got it working. Tho i'm not giving up yet..

I'm happy with RF but would like to try that Phoenix too

-- jp

I use my esky Tx with clear veiw.Works great.

works with aerofly... and the fake usb tx's work in aerofly as well.

Any of you guys switching the micro switches under battery 3 to work with these sims? I found that my Esky 6ch Tx will only work if those switches are reversed. I wonder if it's my USB adaptor not decoding CCPM properly.

There is an other sim I came across [link=http://www.preflightsim.com/]Preflight[/link] that works via the microphone input, decoding the Tx really well. This one also has a HBK2 model in it. Costs $40 for the software, bit more if you buy cables too. Support is OK, it takes the guy 3 days to reply to an email, but he does get things sorted.

Yea you have to reverse those switches to turn the ccpm off. I also use my Tx and Rx for planes with the switches reversed. I use a futaba for all my helis now.

I've used it and it works fine with FMS, ClearView and Real Flight. I've also used the Art-Tech TX with the USB cable with those simulators and it worked fine with all of them.
Steve