MVVS Engines
#1
Thread Starter

Joined: Sep 2002
Posts: 413
Likes: 0
Received 0 Likes
on
0 Posts
From: Smyrna,
TN
We checked in to bringing in these engines and the following is the response.
The production of the glow engines is not in our top focus right now, we are focused on petrol engines and electricmotors mostly. Therefore we do not start any cooperation based on glow/diesel engines now. We have some .15 left on stock, so if you wish to order few pieces, we can manage that. However, no dealer conditions can apply on the order, as we will run out of .15 soon, and the production of those is not in near future plan.
The production of the glow engines is not in our top focus right now, we are focused on petrol engines and electricmotors mostly. Therefore we do not start any cooperation based on glow/diesel engines now. We have some .15 left on stock, so if you wish to order few pieces, we can manage that. However, no dealer conditions can apply on the order, as we will run out of .15 soon, and the production of those is not in near future plan.
#2
Thread Starter

Joined: Sep 2002
Posts: 413
Likes: 0
Received 0 Likes
on
0 Posts
From: Smyrna,
TN
Just recieved the latest run of Fox .15 b.b. R/C engins and they are the best they produced to date in fit and finish. They are now put together with socket head screws like everyone else. As a diesel it will turn a 9 X 7 Rev-up at over 11,000 Rpm. So it you would like to get an all American diesel .15 let us know we have them in stock.
#3
Senior Member
ORIGINAL: ddd
snip
Therefore we do not start any cooperation based on glow/diesel engines now. We have some .15 left on stock, so if you wish to order few pieces, we can manage that.
snip
snip
Therefore we do not start any cooperation based on glow/diesel engines now. We have some .15 left on stock, so if you wish to order few pieces, we can manage that.
snip
I will meet the MVVS CEO in Nuernberg and check out my position in this. For the time being I do have stock coming in, and spare parts as well.
#7

My Feedback: (2)
Joined: Feb 2002
Posts: 2,995
Received 0 Likes
on
0 Posts
From: Hervey Bay Queensland, AUSTRALIA
Joshua
If you have difficulty locating an MVVS muffler, You may find the Irvine .40 Mk II muffler, or the muffler from a Royal /Magnum Pro /OS 40 or 45 FSR an acceptable substitute. These do not have the extra chamber and will be somewhat noisier.
If you have difficulty locating an MVVS muffler, You may find the Irvine .40 Mk II muffler, or the muffler from a Royal /Magnum Pro /OS 40 or 45 FSR an acceptable substitute. These do not have the extra chamber and will be somewhat noisier.



