No markings, what is this diesel -

it is a PAW model diesel engine.
http://www.eifflaender.com/

Thanks, although I have bought and sold a lot of diesel, don't know much about them, open to offers if anyone wants it. Still can't understand why any engine manf would not put their name or size on an engine.

That appears to be this engine, a PAW .09, that lever on top is not stock, nor is the position of the collector ring.

Ronwc it will have a number stamped on the backplate 09,`15, 19 etc , that is the displacement in C.I. you might want to show it on the diesel site martin

it should have 09 stamped on the back plate

No markings on backplate, but now I see TBR on mount under muffler.

The .09 and others come in two ball bearing and single ball bearing versions. Brits call it Two Ball races.

Will sell this one for $35 shipped if any of you guys want it, gummed up, needs cleaning.

thats a ball bearing engine martin

ENGINE SOLD

If that had been a .19 I'd have taken it myself.

Looks like an MkI, if it had been closer I would have taken it too...

I got it martin

It's a PAW 1.49 RC BR or TBR from about 15 or 20 years ago.
I think the prop spinner nut is from a later version.
The BR or TBR possibility should be resolved by looking on the LHmounting lug.
Here's mine.
Great engine to use and economical on fuel. The engine shown consumes about 1 cc of fuel per minute during normal in-flight idling.

Hey Hobbsy, the collector ring really has no 'stock' position but six different positional possibilities open to it (the four bolt head designs have eight!) The side to rear position shown is quite good if a firewall happens to be close to the cooling jacket. Thanks.

this sort of rounds out my PAW mix 03, 06 , ( now an 09), a 15, 29, and 40 martin

Don't forget the 60 Martin..... The 60!......LOL
<br type="_moz" />

And the 49!

i KNOW GUYS I know chaps do not have the 49 and 60 to round it out but unless some super deals show up quitting here I do have a couple of curry burner knockoff offs Sharma 09,15,19 martin

Hey after 60years got an other drone 29 thats when mine went missing patience

I have a .60 and a .40, the .40 lives hidden in a Sig Rascal 40 and the .60 lives in its box. I actually had to disassemble the .40 to get it in the Rascal then reassemble it in the plane. You might say that the .60 is a bench queen.

My high school bud has a NIB 29 drone lurking some where in his house can not locate it, Still has his model A ford he got in 1950 over the years in concurs condition
as stated thats where my drones came from a month ago martin

HOBBSY nice stuff job on the 40 martin

Here it is with the fuse upside down.

ok group here is my PAW 40 in a Blue Max (hmm not blue) it wears a MVVS carb martin