Lunchboxer's TXT-1 project...
#851
Senior Member
Join Date: Oct 2006
Location: Valley Springs,
CA
Posts: 4,897
Likes: 0
Received 0 Likes
on
0 Posts
RE: Lunchboxer's TXT-1 project...
I thought the Tamiya would be better than my Futaba Im running, hmm. Ill have to test both!
Man, last time I saw that video was like 1 or 2 years ago!
Man, last time I saw that video was like 1 or 2 years ago!
#852
Thread Starter
RE: Lunchboxer's TXT-1 project...
You mean the TEU-101 ESC?!
I mean, I really like that ESC, and I agree that it is really under-rated.. (just take a look at its current limit..) But it is definitely still not a 13T ESC..
I would not run dual motors on that ESC... you are just asking for trouble!!
I mean, I really like that ESC, and I agree that it is really under-rated.. (just take a look at its current limit..) But it is definitely still not a 13T ESC..
I would not run dual motors on that ESC... you are just asking for trouble!!
#854
RE: Lunchboxer's TXT-1 project...
I'm running it at dual motor (Parallel) it is really weird because the temperature is just the same as I was running on single motor. []
Anyway it is just temporary...I spend my time with my TXT mostly on building than running!
Anyway it is just temporary...I spend my time with my TXT mostly on building than running!
#855
Senior Member
Join Date: Oct 2006
Location: Valley Springs,
CA
Posts: 4,897
Likes: 0
Received 0 Likes
on
0 Posts
RE: Lunchboxer's TXT-1 project...
I plan to get an EVX for mine, btu for now Im running the Futaba, its been fine since I installed it, so I dont have any worries wit hthe silver cans.
#856
Thread Starter
RE: Lunchboxer's TXT-1 project...
Ha, I know what you mean.. I am gonna change that.. I am gonna run all my RCs more from now on.. instead of keep on building new ones.. ha!!
ORIGINAL: carldav
I spend my time with my TXT mostly on building than running!
I spend my time with my TXT mostly on building than running!
#859
Thread Starter
RE: Lunchboxer's TXT-1 project...
Not sure.. it would be the #400 in Tamiya talk.. but I don't know what's the equivalent in viscousity weight.. 30-40 wt I'd guess...
#861
Thread Starter
RE: Lunchboxer's TXT-1 project...
LOL, my guess was pretty close!
Since my TXT was heavier, I run heavier oil on the rear and put the preload collars on...
Front is always light due to the power wheelie, so I run the stock oil.. ha!
#864
Senior Member
Join Date: Oct 2006
Location: Valley Springs,
CA
Posts: 4,897
Likes: 0
Received 0 Likes
on
0 Posts
RE: Lunchboxer's TXT-1 project...
Eh, I don't care! It only burned my finger after I went climbing...(okay, but it ONLY got hot that one time!)
Besides, its lasted since 2004!
Besides, its lasted since 2004!
#866
Senior Member
Join Date: Oct 2006
Location: Valley Springs,
CA
Posts: 4,897
Likes: 0
Received 0 Likes
on
0 Posts
RE: Lunchboxer's TXT-1 project...
Well, I dont think Ill be running on it anytime soon. I might order a bunch of stuff from Digi Key, some heatsinks, fans, capacitors, etc. Radioshacks fans are a bit pricey IMO.
Go buy a R/C already!
Go buy a R/C already!
#868
RE: Lunchboxer's TXT-1 project...
Nice!
On my txt, even if I place the battery holder up front, It can still do the wheelie! TXT has a montrous torque! Btw Mine is 45 weight. I bought a separate brand (GS Racing) for the damper oil.
On my txt, even if I place the battery holder up front, It can still do the wheelie! TXT has a montrous torque! Btw Mine is 45 weight. I bought a separate brand (GS Racing) for the damper oil.
ORIGINAL: Lunchboxer
LOL, my guess was pretty close!
Since my TXT was heavier, I run heavier oil on the rear and put the preload collars on...
Front is always light due to the power wheelie, so I run the stock oil.. ha!
LOL, my guess was pretty close!
Since my TXT was heavier, I run heavier oil on the rear and put the preload collars on...
Front is always light due to the power wheelie, so I run the stock oil.. ha!
#869
Thread Starter
RE: Lunchboxer's TXT-1 project...
Met up with TEX for a run w/ our monster trucks.. geez, my run lasted exactly 2 seconds.. [:@]
The TXT hit a stationary rock (you know, the kind that sticks out a little bit out the ground, but you know it weights 2 tons if you dig it out??)
The skid took a beating.. and snapped one of the lower link ball connectors...
The TXT hit a stationary rock (you know, the kind that sticks out a little bit out the ground, but you know it weights 2 tons if you dig it out??)
The skid took a beating.. and snapped one of the lower link ball connectors...
#870
Thread Starter
RE: Lunchboxer's TXT-1 project...
I guess that's what you get when you got a truck this heavy and can accelerate this quickly.. LOL!!
Anyway, while trying to drill out the broken bit tonight, I broke a drill bit and stabbed my finger.. Ouch.. We talk about sweat and blood.. I guess this is really sweat and blood.. doh!!
I hammered this out a little bit.. hey, more battle scars = more characters..
Anyway, while trying to drill out the broken bit tonight, I broke a drill bit and stabbed my finger.. Ouch.. We talk about sweat and blood.. I guess this is really sweat and blood.. doh!!
I hammered this out a little bit.. hey, more battle scars = more characters..
#871
RE: Lunchboxer's TXT-1 project...
ORIGINAL: Lunchboxer
I guess that's what you get when you got a truck this heavy and can accelerate this quickly.. LOL!!
Anyway, while trying to drill out the broken bit tonight, I broke a drill bit and stabbed my finger.. Ouch.. We talk about sweat and blood.. I guess this is really sweat and blood.. doh!!
I hammered this out a little bit.. hey, more battle scars = more characters..
I guess that's what you get when you got a truck this heavy and can accelerate this quickly.. LOL!!
Anyway, while trying to drill out the broken bit tonight, I broke a drill bit and stabbed my finger.. Ouch.. We talk about sweat and blood.. I guess this is really sweat and blood.. doh!!
I hammered this out a little bit.. hey, more battle scars = more characters..
Looking at the beefy skid, it's hard to imagine how the hell this could happen on a rock =O!
#872
Thread Starter
RE: Lunchboxer's TXT-1 project...
Put some JunFac ballend on, and some steel screws through.. if it breaks again, at least I can get it out from the other side...
#873
Thread Starter
RE: Lunchboxer's TXT-1 project...
I don't want to gross people out.. but let's just say that there was blood on the TXT (literarily!) and it wasn't pretty... I hope there's no other damage.. doh!!
Yeah.. it was a good hit alright.. but now the TXT is stronger than ever, hee hee..
ORIGINAL: aer-wubby
You succeeded to post pics of the messed up skid, but where are the damage pics of the warrior's (you, in this case =P) finger?
Looking at the beefy skid, it's hard to imagine how the hell this could happen on a rock =O!
You succeeded to post pics of the messed up skid, but where are the damage pics of the warrior's (you, in this case =P) finger?
Looking at the beefy skid, it's hard to imagine how the hell this could happen on a rock =O!
#875
Thread Starter
RE: Lunchboxer's TXT-1 project...
Yeah, sorry I had to run early that day.. got to keep the girlfriend happy too.. LOL!
We will meet up sometimes this week for sure.. if you got time!! Maybe I will get to see your Savage!!
ORIGINAL: []TEX[]
Ouch, I know how that feels! WHEEEW[:@]
At least we had a good time with our WW2s. They never fail us!
Ouch, I know how that feels! WHEEEW[:@]
At least we had a good time with our WW2s. They never fail us!