Hi Rye,

I've added a couple of pictures of the ESC's interior; the Fets are all in one plane, so adding a cooler, like the custom made one in the pics, should not be a problem. Leave the housing off and use shrinktube to hold the cooler in place.

I have no hull available to test the ESC with two, let alone one 700 Neodym on 12V, but I can mount an 8" airscrew on a 700 Neodym and see what the ampdraw is and if the ESC will cut out under load.

Regards, Jan.

Jan,the esc is short circuit protected and will stop with a single 700bb connected.
All you need to disprove that is a reel of cable with the correct gauge to make a resistor that will draw a 700 stall current and a 12 volt bulb.
Tony

thanks guys
i got one that i use have three of them this one i got from LHDOCKYARD they are great wish i would be able to get 2 but wish in one hand and u know the rest anyways they are hard to get the guys in canada and hes hard to deal with takes 1-3 months he saids it sits in customs for a long time and wont answer e-mail or phone calls had to trick him to return calls any way this is it don at LH is shipping today thanks for all the help rye
http://www.modelcontrol.com/sc480.htm

hi guys she done i got a sc-480 finally and she good to go 48"" by 16 lights dancing dolls with a sevro recoreder from
http://www.servocity.com/ just got to add the ipod she will be doing a nite run this weekend tested her in the tub last nite very tight fit no leaks put in a fuel pump to pump water for the coolers ,this boat will not be going fast so the pickups will not be good thanks rye


http://www.youtube.com/watch?v=VJ6bL...e=channel_page