Lets see your foam-me 163s!
#2
Member
Join Date: Oct 2003
Location: Frankston VICTORIA, AUSTRALIA
Posts: 50
Likes: 0
Received 0 Likes
on
0 Posts
RE: Lets see your foam-me 163s!
Well here's mine , It's an S&B models Me163c made from EPP and EPP/styro wing .
I covered it with Chrome ProFilm and a little red tape.
I was suprised how easy it was to cover and using the iron and heatgun was not a problem with the foam
It Has a permax 480 and Graupner 6.5"x4" semi scale prop . An sjpropo 25amp speedie and a Quantum
8cell 1100mah NiMh pack JR R610M rx and Naro servos
Have'nt got into the brushless or lippo setups yet , something to look forward to.
Best thing about this plane is how tuff it is. EPP is the way to go IMHO.
these are alot of fun in air combat.
Silly thing is though that i still have'nt had a chance to fly it , been to busy building planes for everone else
Here's a link to S&B
They make lots of scale/near scale EPP warbirds.
[link]http://www.sbrcmodels.com/store/agora.cgi[/link]
I covered it with Chrome ProFilm and a little red tape.
I was suprised how easy it was to cover and using the iron and heatgun was not a problem with the foam
It Has a permax 480 and Graupner 6.5"x4" semi scale prop . An sjpropo 25amp speedie and a Quantum
8cell 1100mah NiMh pack JR R610M rx and Naro servos
Have'nt got into the brushless or lippo setups yet , something to look forward to.
Best thing about this plane is how tuff it is. EPP is the way to go IMHO.
these are alot of fun in air combat.
Silly thing is though that i still have'nt had a chance to fly it , been to busy building planes for everone else
Here's a link to S&B
They make lots of scale/near scale EPP warbirds.
[link]http://www.sbrcmodels.com/store/agora.cgi[/link]