3D-Flyer Kevin

Hi,

I would like to learn how to build 3d foamies. Is there a good guide out there that could teach me how to build, what to build with, and the techniques to use.

AJ1202

Kevin, jump on fun with flat foam or one tough delta thread and you can find a lot to help you out, there are a few different 3-d planes with plans and build guides there. The Nasty is a good 3-D build to start with

jdetray

Kevin-

Go to [link=http://www.foamyfactory.com/]FoamyFactory.com[/link]. Near the bottom of the [link=http://www.foamyfactory.com/airplanes.htm]plans page[/link] are free plans for two 3D foamies, the 3DX and the Ultimate Biplane. Download the plans and print them. I don't know much about the Ultimate, but the 3DX is a great-flying 3D plane.

Further down on the plans page, you will find links to online discussion threads where the building and flying of these planes is discussed. That should give you the info you need to build the planes from the plans.

Have fun!

- Jeff

3D-Flyer Kevin

Thanks alot. I found the nasty to be the plane that suites me best. So I will start building soon.

Thanks,
Kevin