scvsteve

My Feedback: (1)

I have an Al ulinger foamie with a hacker x-20 pro esc. The motor is an A-20-22 hacker. I have run this motor and speed controller in my last plane no problems. I recently bought a new a new al ulinger foamie and cannot get the motor to chirp or work. All of the servos function but just not the motor. I have tried connecting the motor with the 3 wires differant ways to the speed controller but still not juice. What I am doing wrong? When plugging into the receiver it is in channnel 3 which is the throttle channel. Is the brown wire coming from the speed controller supposed to be equal to black with the rest of the servos. I am using Hitect servos. It worked fine in the last foamie when I disconnected it. All I did was to change from one plane to another. Please help.

scvsteve

My Feedback: (1)

The problems all stem from the fact that the receiver channel 3, throttle, went out. Replaced the receiver and all is fine.