9CAP issue when altering EPA
09-23-2013, 12:20 PM
#1
Thread Starter
Join Date: Aug 2004
Location: PN, NEW ZEALAND
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
9CAP issue when altering EPA
I accidentally posted this in the root directory 'Radio Manufacturer Direct Support'. Can someone please delete from there. Thanks
------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Hi guys, I have a quick query.
I have had my 9CAP for about 10 years now and it has never missed a beat. Until now...
Whenever I alter my EPA it seems to do the sub trim. when I alter the sub trim this does the sub trim as it should.
I haven't made any modifications the Tx since I have had it. the only things different from stock are a CamPAC module, a 2500mah 3s LiPo Tx pack that I now use as my NiCad died. And I use an OrangeRx module for my 2.4 receivers.
I love my 9CAP and am reluctant to give it up just yet as all my planes that were initially set up on it are fine. setting up new planes works OK its just I cant do the EPA so I tend to just tone down the EXP.
Is anyone able to help me out with what may have gone wrong??
Cheers
------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Hi guys, I have a quick query.
I have had my 9CAP for about 10 years now and it has never missed a beat. Until now...
Whenever I alter my EPA it seems to do the sub trim. when I alter the sub trim this does the sub trim as it should.
I haven't made any modifications the Tx since I have had it. the only things different from stock are a CamPAC module, a 2500mah 3s LiPo Tx pack that I now use as my NiCad died. And I use an OrangeRx module for my 2.4 receivers.
I love my 9CAP and am reluctant to give it up just yet as all my planes that were initially set up on it are fine. setting up new planes works OK its just I cant do the EPA so I tend to just tone down the EXP.
Is anyone able to help me out with what may have gone wrong??
Cheers
09-24-2013, 09:26 AM
#2
Join Date: Jan 2003
Location: Champaign, IL
Posts: 3,796
Likes: 0
Received 0 Likes
on
0 Posts
Try going into a completely blank model and see if these EPA adjustments change your subtrim. Normally you should set the End Points first before setting any Subtrim. And subtrim is only meant to be used in very small amounts.
If the subtrim is still affected in a new blank model, we would recommend sending this in to be checked out.
Sincerely,Krysta
Product Development & Support Specialist
Futaba Service Center USAs
[email protected]
If the subtrim is still affected in a new blank model, we would recommend sending this in to be checked out.
Sincerely,Krysta
Product Development & Support Specialist
Futaba Service Center USAs
[email protected]
09-30-2013, 06:09 PM
#3
Thread Starter
Join Date: Aug 2004
Location: PN, NEW ZEALAND
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
Try going into a completely blank model and see if these EPA adjustments change your subtrim. Normally you should set the End Points first before setting any Subtrim. And subtrim is only meant to be used in very small amounts.
If the subtrim is still affected in a new blank model, we would recommend sending this in to be checked out.
Sincerely,Krysta
Product Development & Support Specialist
Futaba Service Center USAs
[email protected]
If the subtrim is still affected in a new blank model, we would recommend sending this in to be checked out.
Sincerely,Krysta
Product Development & Support Specialist
Futaba Service Center USAs
[email protected]
Sending in could be quite difficult being in New Zealand. Do you know who the distributor is for NZ??
Thanks for your help!!
10-02-2013, 06:38 AM
#4
Join Date: Jan 2003
Location: Champaign, IL
Posts: 3,796
Likes: 0
Received 0 Likes
on
0 Posts
Sorry to hear that its still not working.
The closest Distributor to you would be;
AUSTRALIA
RC Wholesale Australia Pty. Ltd.
Unit 15 / 49 Great Eastern Highway
Rivervale Western Australia 6103
Telephone: +61 (8) 9328 8855
Fax: +61 (8) 9328 8188
Email: [email protected]
They should be able to tell you who is the closest repair and warranty center.
Sincerely,Krysta
Product Development & Support Specialist
Futaba Service Center USA
[email protected]
The closest Distributor to you would be;
AUSTRALIA
RC Wholesale Australia Pty. Ltd.
Unit 15 / 49 Great Eastern Highway
Rivervale Western Australia 6103
Telephone: +61 (8) 9328 8855
Fax: +61 (8) 9328 8188
Email: [email protected]
They should be able to tell you who is the closest repair and warranty center.
Sincerely,Krysta
Product Development & Support Specialist
Futaba Service Center USA
[email protected]
10-07-2013, 12:58 PM
#5
Thread Starter
Join Date: Aug 2004
Location: PN, NEW ZEALAND
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
Thanks Krysta, currently lookin at upgrading to a 12FG so will see how I get on with the one I am looking at purchasing. Might just keep the 9c for budget electrics.
Thanks
Thanks
