Futaba Servos
#1
Senior Member
Thread Starter
Join Date: Feb 2005
Location: Lady Lake,
FL
Posts: 352
Likes: 0
Received 0 Likes
on
0 Posts
Futaba Servos
I bought a box full of Futaba servos and thought that all were FP-148s but there are three Fp-128s in the lot. I can not find any info on the FP-128 can you help. I just started to test them when I found out they are not the same.
Thanks
Thanks
#2
Join Date: Jan 2003
Location: Champaign, IL
Posts: 3,796
Likes: 0
Received 0 Likes
on
0 Posts
Futaba Servos
Hi Bingo Flyer,
The FP-S128's were the predecessor to the S148's, they are very similar in size and torque and should have the same connectors on each.
Please see our website at:
http://www.futaba-rc.com/servos/futm0029.html
I hope you find this information helpful. Should you have any further questions or concerns, please do not hesitate to contact us at 217-398-8970 for Support, 217-398-0007 for Service or via fax at 217-398-7721 or by email at [email protected].
Sincerely,
Krysta
Lead Futaba Customer Service and Programming Technician
Also you may want to check our Website at (http://www.futaba-rc.com)
The FP-S128's were the predecessor to the S148's, they are very similar in size and torque and should have the same connectors on each.
Please see our website at:
http://www.futaba-rc.com/servos/futm0029.html
I hope you find this information helpful. Should you have any further questions or concerns, please do not hesitate to contact us at 217-398-8970 for Support, 217-398-0007 for Service or via fax at 217-398-7721 or by email at [email protected].
Sincerely,
Krysta
Lead Futaba Customer Service and Programming Technician
Also you may want to check our Website at (http://www.futaba-rc.com)