setting up Giant Extra
03-30-2003 | 04:26 AM
#1
Thread Starter
Junior Member
Joined: Oct 2002
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
From: Jupiter,FL.
setting up Giant Extra
Hi,
I built the GP Giant Extra 330l and would like to know what to get(Tx/Rx,servos) and what to expect to pay.
I am going with the 2 two servo per aileron.
I have a DA-100. I was told, for balance, I should use the servos in the cut-outs provided as opposed to a pull-pull set-up.
Please help.
Thanks
I built the GP Giant Extra 330l and would like to know what to get(Tx/Rx,servos) and what to expect to pay.
I am going with the 2 two servo per aileron.
I have a DA-100. I was told, for balance, I should use the servos in the cut-outs provided as opposed to a pull-pull set-up.
Please help.
Thanks
03-30-2003 | 12:14 PM
#2
Senior Member
My Feedback: (2)
Joined: Jan 2002
Posts: 2,636
Likes: 0
Received 0 Likes
on
0 Posts
From: Tuscola,
IL
setting up Giant Extra
Hi, Bill!
Yes, definitely use the cutouts. you will also need a large receiver battery back there in the tail.
the manual provides you details on the specific radio gear we recommend and what we used in our birds is on the plans.
I would recommend a quality computer radio, at least an 8U or 9C or equivalent (not a 6X), and I would definitely recommend PCM for your gas installation.
Yes, definitely use the cutouts. you will also need a large receiver battery back there in the tail.
the manual provides you details on the specific radio gear we recommend and what we used in our birds is on the plans.
I would recommend a quality computer radio, at least an 8U or 9C or equivalent (not a 6X), and I would definitely recommend PCM for your gas installation.
