RCU Forums - Elevator deflection

RCU Forums (https://www.rcuniverse.com/forum/)

- Futaba Radios Direct support forum (https://www.rcuniverse.com/forum/futaba-radios-direct-support-forum-125/)

- - Elevator deflection (https://www.rcuniverse.com/forum/futaba-radios-direct-support-forum-125/3953718-elevator-deflection.html)

Echoes

02-24-2006 10:48 AM

Elevator deflection

I'm using a MSA 10 on my elevators ( one servo per) and everytime I turn on the plane one servo will go to extreme up then back to center, will be fine after that, Why? I'm using 8611 servos w/ Futaba 9CAP W/ PCM 149. Is it because they are JR servos?
Thanks, [:o] Lee

Bax	02-24-2006 11:04 AM

RE: Elevator deflection

Please check this with a different servo plugged into that slot in the MSA-10. It may be something in the servo, or the MSA-10. It shouldn't do that. If you can, please check to see if you get the same difficulty if you use Futaba servos connected to the MSA-10.

It may have something to do with the mix of Futaba and non-Futaba equipment.

All times are GMT -8. The time now is 11:08 AM.