BME 110 performance data.
09-10-2003 | 09:52 PM
#1
Thread Starter
Senior Member
My Feedback: (5)
Joined: Oct 2002
Posts: 6,747
Likes: 0
Received 0 Likes
on
0 Posts
From: An Iceburg in, ANTARCTICA
BME 110 performance data.
Just curious to see what type of performance people are seeing with this engine...so post your data HERE!!!!
09-11-2003 | 04:26 PM
#2
Banned
My Feedback: (1)
Joined: Jan 2002
Posts: 1,222
Likes: 0
Received 0 Likes
on
0 Posts
From: concord, NC
RE: BME 110 performance data.
My apologies for not replying sooner.
Prop tests conducted 2 weeks ago gave the following numbers. All numbers are with the engine thoroughly warmed up with over a minutes run time before the reading was taken:
Mejzlik 28-10, 6850-6900
AM 28-10, 6900+
Menz-s 27-10, 6900+
Menz-s 28-10, 6250-6300
Mejzlik 29-10 (squared tips to 28"< purpose is to reduce rpm but still have a wider blade for good pull) 6400 rpm
These are on an engine that does NOT have a "tuned" exhaust, using 3" headers and BIG mufflers to quiet the noise. Loudest prop dB'd at 94-95 db's at 25', quietest was about 90-91 db's
Prop tests conducted 2 weeks ago gave the following numbers. All numbers are with the engine thoroughly warmed up with over a minutes run time before the reading was taken:
Mejzlik 28-10, 6850-6900
AM 28-10, 6900+
Menz-s 27-10, 6900+
Menz-s 28-10, 6250-6300
Mejzlik 29-10 (squared tips to 28"< purpose is to reduce rpm but still have a wider blade for good pull) 6400 rpm
These are on an engine that does NOT have a "tuned" exhaust, using 3" headers and BIG mufflers to quiet the noise. Loudest prop dB'd at 94-95 db's at 25', quietest was about 90-91 db's
