BME 110xtreme?
11-10-2003 | 08:40 PM
#1
Thread Starter
Senior Member
My Feedback: (17)
Joined: Oct 2002
Posts: 2,320
Likes: 0
Received 0 Likes
on
0 Posts
From: Cressona, PA
BME 110xtreme?
I have a question concerning the ignition that came with my engine. This is my first gasser so pardon my ignorance.
The Ignition has 4 wires coming out of it. The wires that come from the sensor only have 3. I ordered a sensor directly from CH with 4 wires. Looks like the 4th one is a ground. Do I need to switch sensors or is the 3 wire setup ok? Hope somebody knows what I am talking about.
The Ignition has 4 wires coming out of it. The wires that come from the sensor only have 3. I ordered a sensor directly from CH with 4 wires. Looks like the 4th one is a ground. Do I need to switch sensors or is the 3 wire setup ok? Hope somebody knows what I am talking about.
11-10-2003 | 11:21 PM
#2
My Feedback: (1)
Joined: Jan 2002
Posts: 3,114
Likes: 0
Received 0 Likes
on
0 Posts
From: Riverton,
WY
RE: BME 110xtreme?
Its Plug n Play. One of the 3 wires to the sensor is ground, the 4th wire is also grounded. One is grounded to the ignition the other to the engine. So no matter if you trigger the unit with out spark plugs, the sensor is protected.
