Quadra Identification
07-05-2004 | 05:23 PM
#1
Thread Starter
Junior Member
Joined: Jul 2004
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
From: Maudsland, AUSTRALIA
Quadra Identification
I have a Quadra that I bought some years ago and has been in storage ever since. It does not have any markings so I can only supply the following data in the hope that someone may be able to assist in its ID. It has a Walbro carby , Magneto Ign , recoil starter , the internal bore is 1 & 5/8 " and the serial # 395055 .
I am about to use it in a Laser 200 that I bought with it so when I know what it is I will come back to this forum for some advice and suggestions.
Thanks
Rod H
I am about to use it in a Laser 200 that I bought with it so when I know what it is I will come back to this forum for some advice and suggestions.
Thanks
Rod H
07-05-2004 | 06:50 PM
#2
Thread Starter
Junior Member
Joined: Jul 2004
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
From: Maudsland, AUSTRALIA
RE: Quadra Identification
I have just received an e-mail from US Engines and they have identified it as an older Quadra 50 , now sold as a Quadra 52. So I have the info needed .
Thanks
Rod H
Thanks
Rod H
