Engine Selection Help
10-01-2002 | 06:49 PM
#1
Thread Starter
Senior Member
My Feedback: (1)
Joined: Jul 2002
Posts: 125
Likes: 0
Received 0 Likes
on
0 Posts
From: Euless,
TX
Engine Selection Help
I have a set of RCM plans for a quarter scale Stolp Starduster Too. These plans were designed around an ST2000, back in 1990. I would like to move to gas, but have no experience in this arena. The Starduster is a sport biplane with wing area in the neighborhood of 1450 square inches. If the plane weighs in at the design weight of 16 pounds, this results in a wing loading of around 31 oz. per sq. ft.
Any help will be appreciated. This plane is not an aerobat, but is more of a "Sunday Flier", and will, in all likelihood, be flown that way.
Any help will be appreciated. This plane is not an aerobat, but is more of a "Sunday Flier", and will, in all likelihood, be flown that way.
